Thread: Lavry MP10 micpre

Giving the MP10 away for $700.00 now;

mp10.jpg

As with all of Lavry Engineering’s products, the MP10 embodies Dan Lavry’s design philosophy of sonic transparency. With features like wide range digitally controlled analog gain circuitry, impedance switch, and balanced or unbalanced outputs, the MP10 offers flexibility and ease of integration into both home and studio recording environments. Precise gain settings from 20 to 75 dB’s give the MP10 enough range to easily accommodate low output Ribbon microphones, or feed unbalanced “-10dBV” inputs using high output condenser microphones without loss of signal quality. The sonic performance rivals or exceeds that of much more expensive units, and is extremely consistent over the entire gain range. Accurate matching of the two channels also makes the MP10 ideal for true stereo recording applications.

Features

Ultra-low distortion and noise
Transformerless input and output
Wide Gain range of 20-75 dB in 1 dB steps with numeric digital display
High/Low z switch optimizes input for Ribbon or Condenser & Dynamic Mic’s
Balanced/Unbalanced Output switch
Rear panel switch status displayed on front panel during start-up
Large detailed LED level meters with 42 dB range
Triple regulated Phantom power, selectable per channel
The housing is a “half-rack” enclosure with its own power supply, which operates on a wide range of AC power inputs from 90 to 264VAC at line frequencies of 40-63Hz.
An optional LavryBlack Rack Mount is available to mount two LavryBlack units side-by-side in a 19” 1U space.


Specification

Distortion Measured at -3dBFS (21dBu) at 1kHz, 10kHz, &20kHz:
Gain Setting 20 Less than 0.00070%dBFS
Gain Setting 40 Less than 0.00090%dBFS
Gain Setting 60 Less than 0.00800%dBFS

Noise: Input referenced noise at Gain Setting 40 with -999dBr input
150 Ohm source Less than -124dBu (Unweighted)
Less than -127dBu (A-Weighted)

Inputs: Transformer-free electronically balanced Pin 2 “+” XLR inputs with common hi/lo impedance switch.
Phantom Power: +48 volts Phantom power for condenser microphones, can be enabled or disabled for each input channel individually using front panel switch.
Outputs- Transformer-free electronically balanced outputs. Rear panel switch for balanced Pin 2 “+” or unbalanced Pin 2 “Hot” operation.
Meter: 14 segment LED meter per channel, displays output signals ranging from -42 to 0dB below peak output level. Maximum balanced peak output 24dBu, maximum unbalanced peak output is 18dBu.
Dimensions and Weight: 8”wide x 10.75” deep* x 1.75” high, 4.5 lbs
*depth includes clearance for front and rear panel switches and connectors

AC Power:
Voltage 90-264 VAC, Frequency 47-63Hz, Current 0.1A
Fuse Rating 4A “Fast Blow” *
*Subject to change! Please always check the rating on the fuse and the one printed next to the
fuse holder on the power supply PC board before replacement. Replace the fuse ONLY with a
fuse of the same rating. If you have any questions, contact: techsupport@lavryengineering.com

Sorry, this has been SOLD. and I do miss them! Love Lavry!

Seasons Greetings!