Search found 54 matches

so one more thing Al, you are saying that its definately always better to have all your tracks hitting around -12 and then post recording do some compression and what not to get things a bit louder ...

Yes you are definitely clipping. Be sure to keep an eye on your levels going in as there's really no need for your peaks to be going past around -12dbfs. There's plenty of headroom as long as you're r ...

The audio technica mics are very decent, and I like them more than the MXLs mostly because they have detail in the top end rather than a glassy sheen like the mxls do. The packages you're looking at a ...

ADAT is basically a digital signal, so you should really look into external conversion as a means of bypassing MOTU's decent, but not pro quality, conversion. I can't think of any tube preamps with ad ...

In an XY pattern think of how you're positioning the capsules themselves, not the bodies of the mic. Instead of reading though, go set them up and experiment a little bit.

As far as being the "best ...

Is this a legit copy of waves with an I-lok key? Are we dealing with a cracked version of the software and all that that implies?

I'm willing to bet this was probably the issue.

If you're talking about using two edge controlled heads (pinstripes, ec2, genera dry) on top and bottom heads this may be good if you're going for a very dead sound. For a change of pace from the pins ...

Unless you get the Music Production Toolkit, you can only process one track at a time with Beat Detective. MPK has lots of other great stuff with it too, so it's definitely a must purchase for people ...

Shure SM57 x2
Audix I5 x2
Sennheiser e609 x1
AKG D112 x1
Sennheiser MD421 x2
Audio Technica ATM25 x1

M Audio Sputnik x2
Audio Technica AT4040 x2
Audio Technica AT4050 x1
AKG C414B-ULS x1
S ...

I love the way Sterling Audio's ST44's (Groove Tubes GT44s) sound on conga's either in x/y above a set of congas for a player like Giovanni who's all over the place, or closer on each drum for a playe ...

I work at a big box retailer such as is being discussed here.

I find that the problems that are being discussed are common at any kind of store whether it's mom and pop or big box. I will call othe ...

I work at a big box retailer such as is being discussed here.

I find that the problems that are being discussed are common at any kind of store whether it's mom and pop or big box. I will call othe ...

Would I benefit with recording anything with my old sm58?
You rush down to the VFW only to find out that it has burned down to the ground. There was an accident involving confusion between "magic" b ...

I'm assuming it would be the filters or envelopes of the synths you are using. I don't think this will cause any problems when mastering because I don't believe they are looking for a visually perfect ...

I've tried the HM1 on a few different vocalists, but it's never been a keeper except for one female singer songwriter type. In her case, the HM1 sounded fantastic.

The HM2D is going to be my next m ...