Search found 219 matches

Hey man...

try posting this same question in the forum just above this one.

I think you will find more techies there and I simply don't have the answer for you.

Good luck!

Brock

Make sure you have the via 4in1 drivers installed for your board. go to the manufacturer's site first and make sure they don't have a specific version of them for that mobo. If they do not then inst ...

now that's a bit odd...

you are burning "disk at once" right?

yeah! I do!

get yourself a small mixer AND upgrade your soundcard!

but seriously...

go get yourself a little mixer...

alright, that gives some food for thought.

I'm not familiar with the Echo products so I did some googling.

First of all you say that you are coming out of your soundcard's outputs. These are 1/ ...

good advice.

by the way... don't use a y cord to bridge both headphone outs to one pair of headphones. that's not going to help and may cause damage to your headphone amps (unlikely but possible) ...

The ones that come with Samplitude are amazing. Truly. Not just in quality but in terms of efficiency.

I prefer most of the stock plugs to the Waves plugs. And for the added bonus of lower res ...

Thanks DH! Tie Game!!

mouse and touchscreen usable at the same time...

Right now I just have a mouse. Sad

absolutely. In which case it's best to chop it up into regions... and work with it in pieces (or at least that's how I would work with it). Probably push it against some brickwall limiting and leav ...

I'll have to take a look.

thanks man!

that *can* be correct...

It really depends on the source material. All it would take is one good pop on a "p" for it to be somewhat ineffective. This is because that plosive will normalize to the ...

the funcion of "normalize" as referring to a DAW:

to bring the peak value of the program material (track, mix, etc.) to a specific level (ie, 0db).

Usually this isn't a problem as you aren't a ...

and to keep the kids honest check this out...

free mini Nuendo clone... ha!

No vsti or midi implementation yet but he says he's working on it.

[url=http://www.kreatives.org/kristal/index.p ...

They don't really know yet...

the 400 is supposed to be around $20,000.00 usd

the 200 is projected to be around $12,000.00

Seems pricey, but considering what you get for the money it's pre ...