Search found 27 matches

Thanx for all your options, but it's not exactly what I'm looking for, I was talking about the dynamic eq like the one in Adobe Audition. The ones that you can program to change a track eq throughout ...

I'm a Full Sail grad. I actually grew up in Franklin, TN - 45 minutes from MTSU. When I was looking into recording schools, I considered MTSU. The only reason I chose Full Sail was due to the fact tha ...

I know the effect you're going for. I have used pro tools in grid mode to accomplish this effect. There may be an easier/quicker way to do this, but I haven't had the need for this effect very often, ...

I recently bought a SACD/5.1 system. I also bought the SACD version of Sting - Brand New Day. Everyone needs to hear this. It's absolutely amazing.

The first thing you should do is, assuming you're using a cardiod mic, is to place the mic so that it is facing as close to exactly opposite of the hi hat as possible. This will allow the mic's null p ...

I'm in the market for an 8 channel set of converters with preamps to go into the ADAT on my digi 002. I'm wondering if any of you have have USED BOTH. I know many have used one of them and will tell ...

is the viewing list restricted? cause it asks me to register, even if i'm already registered?

Try logging in again - I had the same problem, but it worked after I logged in again.

Kev, if I remember correctly, the Digimax only has the Optical Output and no Optical input...Although, the Digimax does have Word Clock I/O, but I don't guess that really helps any 002 owners... :evi ...

I dealt with this problem at one point when I owned a 001 and a Digimax. You'll need to go into your... well, it's either Hardware Setups or Playback Engine and change the sync source from Internal to ...

sickyboy:

I'd like to try this, what do you use to hold the two mics?... Where do you put the 57 on the beater side.Thanks for the help!

Are you kidding??? I think it's most appropriate to use m ...

I have both the fw1884 and 428 with ad card.

The tascam does do smux therefore you can run 96k but limited to 4 tracks from the 428 using the adat cable.

However, notice that the fw1884 is an 18 ...

Okay - this should make it easy. I've never use the Tascam unit you're talking about, but I saw on Tascam's website that the unit has the ADAT lightpipe connection on the rear, very similar to many ot ...

Actually, the ISA 428 IS 8 channels (4 Focusrite Pres, along with 4 external balanced inputs). With the A/D option card, all 8 channels can be transmitted via ADAT or SMUX. Great piece of gear. I want ...

As for replacing your drum hits with sampled hits, you can use the Sound Replacer plug in, if you're in pro tools. If you don't have that plug, there is a manual way to do exactly what the plug in doe ...

What up - I have used the plugin version multiple times. I haven't had much success using it as the main source for a guitar sound, but when I've used it to dirty up a bass track, it sounds great. I a ...