Search found 50 matches

The one in my tracks sounds real smooth. I even sell a video tutorial on how to get the effect smooth.

I too am tired of this effect. And Ive used it before. SO I am engineering a new version. Alre ...

Regarding Vocals, but also pertaining to other instruments.
I was reading the book Total Recording, by Dave Moulton, and he speaks of sweet'ning the phantom image using delay lines.(Center/Lead vocal ...

Great replies everyone, going to probably use Muslin Fabric. There is a large fabric store in my area(Fields Fabrics), gonna stop by there and get some prices on fabrics.

Oh, and by the way, I ini ...

This is exactly what Im going to use. Great Post. Great Idea.

Ok, I was worried that regular cloth sheets, and stuff like that, would not hold in the Fiberglass material, causing a hazardous contidion.
I guess I could double up on black, tight knitted, non stre ...

I got this futon thingy, post a pic of your example please

I got Owens Corning 703 rigid fiberglass board in a case of 6 @ 24 x 48 x 2 inch pieces.
I need the cheapest material to cover these for placement in vocal room.

Anything that is cheap, yet works. ...

I noticed in the ART Phantom III has a "Output Noise: -115 dBV" compared to the AT8801 "Residual Output Noise: -71 dBV"

But the AT speaks of "Highly regulated voltage" but still has the +/-2VDC, j ...

Hello everyone, I am looking for a good, highly regulated, phantom power supply.
My Emu 1820M's phantom power supply is jacked up, FOR THE SECOND TIME. Bought the Emu, 7 months later, PREAMP PROBLE ...

Transformer, ahhah- a Decepticon in disguise. You cover is blown Michael.

But really, what do you mean "Transformer".

I know of electronic transformers, but you cant be talking about that.

Ok, let me put it like this. "Top End Limiting"

DC Offset Removal
Stereo Correction If Needed
Low Cut Filter, If needed, around 22Hz.
Parametric EQing
Top End Limiting

The "top end limiting ...

Ok my friends. I am in the process of upgrading my studio.
First is Room Treatment. Then TLM49 mic, UAD Card, Upgrade to 2gigs RAM.
I got rid of all the scary foam fire hazard stuff.
I am buildin ...

Im using it more as a limiter.
Compression ratio is variable using the DC Bias knob. Availuble compression is 1:1 or 20:1

Availuable Times:
Attack Times:
0.2, 0.4, 0.8, 20, 80, 100, 120, 300 ms ...

Well as long as you dont engage the 12AX7 tube function, its all good. Also I usually work with a good mix, so if there was an erratic spike in level, either me, or whoever did the mixing, should fix ...

So right now I am using the Nomad Factory LM-662 Dual Limiting Amplifier, a recreation of the Fairchild 670 limiter. I use this as the first plugin in my mastering chain to just even out the dyanami ...