Search found 22 matches

My problem has been with my ears! For the past couple of weeks when I start listening to something it feel like there's pressure on my ears. I've been taking sudafed and claritin like mad trying to ...

If the SM48 is like the SM58 the ball containing the pop shield unscrews from the body exposing the capsule. I would then clean the ball/pop shield as described as this is the bit closest to your mou ...

What about the

The theoretical maximum frequency that can be recorded is half the sampling frequency so with a sampling frequency of 16Khz the maximum possible would be 8Khz. With that constraint ...

Hardware wise I have been pleased with the RME Multiface II which has Linux support.

You are right that the thing that really determines hardware compatibility is whether an ALSA driver exists for ...

i'd work to change the shape of the booth so its not square.

Funny you should say that. I was in an old style church over the weekend, type type with a curved roof and arches and though now much b ...

DAW = Digital Audio Workstation (can be hardware or a PC/Software combination).
IMO = in my opinion.

Fletcher and Munson are two of several researchers that have found that our hearing is more nearly flat in response at loud levels and tends to be bass-insensitive and low volume levels. The various ...

Vote for me when I run for president in 2016 and I swear, I'll subsidize the hell out of the arts!

It is interested that a measure of civilisation and progress is the shift away from the essential ...

Ardroth,

I checked a few specs and the PVM 22 has a sensitivity of c. 4mv/Pa, i.e. c. -48dB re 1V/Pa. A typical condenser mic will have a sensitivity of 12-16mV/Pa, i.e. -38.5 to -36dB so that upg ...

On the first question of there being money to be made, I can not comment on the state of the classical recording industry but where I live (Suffolk, UK) most classical concerts employing only professi ...

Sorry about the strange MP3s - I think what happenned was the MP3 coder treated a 32 bit float wave file as if it were 16 bit integer. I have re-encoded them, uploaded and tested them and it should b ...

OK, the story here is I was singing at a choral concert which someone else was due to record. Due to a misunderstanding this did not happen and I discovered this about ten minutes before the performa ...

The first thing to try, surely, is to set the gain so that the loudest bits don't clip and then listen to the quietest bits to see if the signal/noise ratio is still acceptable. If it is then you're ...

Having started out with a PC and as Tascan US-122 which has two mic inputs I'd now like to increase the number of mic inputs available to me.

I realise that, because of sync problems, I can't just ...

hmmm.... i just heard a 14Hz sine wave on my headphones... no problem....

but below about 35Hz i REALLY had to turn up the volume...

Interesting. I have a pair on Sennheiser PC150s in the offic ...