Search found 63 matches

Maybe you should also consider RME?

Hmmm, I think it should be done by a professional electrician and I don't mean hum and buzz problems I mean staying alive. On the other hand, it's only 110V in US Wink

C0 = 16.35 Hz = midi note 12
C1 = 32.70 Hz = midi note 24
and so on...

I don't know what Bill uses but if you have time to experiment, there is a very good piece of software called KTDrum Trigger. I use it for drums but it can be used for any type of instrument. You can ...

You mean larghetto?

When my watch is largo I'm late at work. When it's larghetto I'm too early. When my watch is largando I change the battery.
Wink

So would that mean that adding an EQ before a compressor is the same as having the same EQ in a side-chain?

No, absolutely not. Eq boost before the comp means more of that frequency is in your soun ...

Ok, if no one with good English wants to reply to this post then I'll try.
When you compress audio with side-chain compressor and you have eq that is for example boosting 6KHz in the side-chain path ...

The control room should be as symmetrical as possible, and the tracking room as symmetrical as possible.
MadMax, is this correct?

Hi
Our drummer is very good, and the average listener would not be able to notice any inconsistancy...
Isn't it the answer to your question?

Do the mix at the studio first then listen to it and d ...

As I said I don't know that particular compressor so I cannot help you much. I guess it's not as simple as just using maximum delay. Use your ears and included manual Wink

. BTW multiband compressor ...

I'm not using Logic and haven't used that compressor but the term "lookahead" usualy means that signal is delayed so it can be analysed by compressor. The longer the delay time is the more precise th ...

Hmm, the two signals should be identical. Bypass your eq and anything that may be in your signal chain. Make sure you listen to the same buss output in Cubase when playing and recording. Play recorded ...

And what is the difference between warm silence and cold, sterile silence.

Cold, sterile silence is when you say to your wife - I need to buy another warm tube preamp... Wink

Yes, warranty is a good thing, but you can have an RME card for silly money if you find a seller with good feedback on ebay. Lot's of people sell Multiface now because the new version (2) is now avail ...

Why not buy a second hand RME Multiface?