Search found 28 matches

diggit. Could it be that the thumper had some sort of problem inside of it that caused the output signals to touch? I checked the specs on the side of the thumper before I plugged it in and it seeme ...

Here's the scenario:

My drum fill consists of 2 X 18" JBL subs, and a bi-amped, monitor wedge with a 12" JBL low driver and a 2" JBL horn. My subs are powered by a Crest 8001 in bridged mode. I ...

Any New Yorkers?

Yes indeed, hit me up sometime. Lets chat.

I am heading out to New York city for the last week of November. I am going to have about 4 days to run around and do whatever I want. I would love to check out some studios while I am there. If an ...

I have mixed on all sorts of stages, from little oblong brickyards, to 1500 seat venues, and every sound guy I have ever seen (who doesn't use smaart....) rings out the system exactly the way you are ...

That is pretty much what I figured...

indeed....

A question:
If I have a build up of a certain frequency in my control room, that is building up right at my sweet spot, can I insert a simple 1/3 octave eq and cut the frequency until the build up ...

I thought this was a live sound forum.........

As far as I know, you cannot sync the 002 to a 001. Also, either of those interfaces would be used on an LE system, and I don't think you can have more than 32 tracks.....I think with the 003 you can ...

As far as I can tell, It seems like the Joe Meek might be your best bet. I have never used one of these units, but having the option to use the built in A/D converters sounds enticing..........

On the Digi002, you can actually run up to 18 inputs at once. You only have 4 pre's on the interface, but you also have 4 more line level inputs, 8 ADAT litepipe inputs, and 2 spdif inputs. 8 analog ...

I FOUND EM!!! These were the mics I was thinking of. The Karma K-Micro

http://www.karmamics.com/kmicro.html

I realize that for a microphone of this size, I won't be able to use em in every situ ...

You should definately get another pair of reference monitors. NS10s are sweet monitors. And they are an industry standard, so you know you are workin on gear that most other engineers are familiar w ...