Search found 92 matches

I just saw an ad banner on RO for Real Traps:
http://www.realtraps.com/
I was going through their site before I read this and it seems you may find your answer there. They also have a device called ...

almost sounds like you're not running asio on the VST multitrack... but if you are, ...?

did you try making changes in the asio multimedia setup?

I have one MOTU Traveler, two Ultralite, one 8pre and one 828 mk2 for a project.. i need to run two computers with 16 I/O each
i plan to use the traveler and 828 as master audio interfaces on each ma ...

the traveller seems to be a great option for a good card on the move.. however, i've been eyeing the m-audio ozonic..

it provides me with a keyboard controller, firewire soundcard and a mic pre wi ...

I've heard the dt770s.. the low end is quite tight but its not really prominent...

why did you buy the ozone in the first place? i'm planning to pick up one myself now.

and the reason is that i'm going to be travelling a lot for the next two years. i've got a four octace MK449C ...

thanks! will do that.

i got a pair of NS10M Studio monitors and have to get a new amp ... what manufacturer/model would be the best bet?

Sure thing! i've just taken over the studio and have found this out. personally, i'd decided that first on the priority list was to get the cabling redone. but i just wanted to confirm that i'm not mi ...

in my studio, which is a modest home-studio setup, i'm seeing something common through all the recordings/mixes: there's is a definite loss in high end.

i'm wondering if this is due to the cabling, ...

i don't remember if i read this suggestion on this forum but here it is:

6- have the mic just above the level of the mouth and point it down. this is a good way of avoiding pops. exact distance and ...

i guess all newer versions are backward compatible.

if you got the waves bundle, try using the C4 multi-band compressor for compressing the voice track. it's got a preset - Pop vocal. some tweaking from that starting point is a good place to be.

another issue: i hooked up the akai to logic running on a pc with the Aardvark Q10 soundcard. when i set logic as slave, the machines lock correctly. but when i set the akai as slave, it just says wai ...

I've connected my PC running Cubase SX2 with my MIDI controller keyboard - Evolution MK449C through USB. The MIDI out from the keyboard is connected to the MIDI in of an AKAI MPC2000.

I've programm ...