Search found 10 matches

hmm, well the ones I am running well project up too 1080p at 24-60 frames.

No reason why if your doing audio post you need to put out a huge amount of cash for a projector, but its your call in the ...

That one in your link seems to be nice as well. 1200 lumens and 15,000 to 1 contrast at about $2500.

The sony is 1100 lumens and 12,000 to 1 contrast for $1100.

both are 1080p so really up too y ...

I would say that you do not need that pricy of a projector for what you are doing.

We use the new Sony VPL-AW15 projectors, we have 3 of them and they work amazing.

They are full HD and can play ...

I was not being specific too just his lecture, my comment was ment as just something you should do in the situations that alow.

anyway, good luck and hope you figure it out.

Yup, I bet its the frame rate. I work alot with audio for Film and Video and you have to be very careful on the import, making sure all the stats stay the same as when you recorded it.

timecode is ...

Check the frame rate at which you recording the video at. If you shot at 30fps then dropped it into a FCP timeline that was at 29,97 your going to have a problem.

Or it could be the clock in the ol ...

All. your cables balanced and shielded? Maybe a pin 1 prob in a piece of gear or look for any other lines running close your your connectors.

Could try to throw a line conditioner in front of your ...

your right, most well have multable camera angles, but low budget shoots are lucky if they have more than one.

What I would do if your having a prolem with aquiring the dialog with the two actors ...

Thanks for the posts, I thought it was probibly ok for dialog but wanted some other insights on this, so am I correct in saying this is not quite CD quality then?

Hello all,
I jsut registered here at this board in hopes of a few awnsers to my questions regarding HDV audio. I have always recorded to DAT or tape in field, 16bit 48k or higher, have always worked ...