Search found 30 matches

Hi all,

I'm thinking of upgrading my home studio but there are just so many gears so little mola! So here's list if gears that I am using....please advise which are the missing links and what upgra ...

Hi all,

I am looking at getting the digital ADC for my Voicemaster Pro but I'm not sure if the ADC is better than my Digidesign 002R.

Will the ADC improve the sound, value of my VMP or should I ...

Looking to get one...what is the more useful tool to get first?

Hi all,

My vocal and harmonies do not sound commercial CD polished. Subjective opinions aside, I want it to sound that way and I hope folks here can share some tips ; )

I know being a Beyonce he ...

Hi all,

I have a Focusrite Voicemaster Pro connected to the 5th TRS channel of Digi 002R via a homemade XLR-to-TRS cable.

Is using a XLR mic cable and adding a removable XLR/TRS adpator better o ...

hi

i'm not an engineer but i am also looking out for DIY traps and diffusers.

RPG is made of hi density open-cell foam where as styrofoam is not in that category. It might offer some hi freq di ...

Moving the pc out of the room means you have to put the recording to some pretty long pre-play before you record. What if you have to do over dubs or several retakes? Probably running around will tire ...

Hiya,

I always find noise from cpu fan seeping blatantly into my recording. I am recording through protools digi002R and into a power book. My room is small - around 6' x 7' with a sloped ceiling b ...

Hi seventhwave99,

Just in case you wish to control the amount of squeeks and string noise, try a little talcum powder (on your fretting fingers, that is!!!)

nehpyh

Secondly, Teddy G: Is there a formula for properly "banging a hole in the wall"? Like:
For a 2" opening, chug down a couple of Bud Lights within 10 minutes of each other...
For a 3" opening, it t ...

Thanks moonbaby and TeddyG,

I'll check out DBX tomorow! It think it's quite affordable in Asia.

I'm using Rode NTK, AT2020 and a couple of SM58s at the moment. My outboard effect processor is TC ...

Hi folks,

I would like to get my first pro channel strip that has mic pre, comp, EQ and etc...I am considering Sebatron Thorax, or to save some cash, a Focusrite Voice Master Pro. I'm using it ma ...

thanks gn,

Protools is indeed weak on the midi portion of home recording. I am running LE and it's the bare minimum.

I tried Cubase SX2 and was impressed with it's functionality and format. Howe ...

Hi folks,

For those who uses a workstation, how many of you sequence and render midi effect, sample, etc... before transferring to a full flag software in your pc?

I have a motif but i usually s ...