Hi, i'm looking for a few expert recording engineer sugguestions on how to possibly improve a guitar sound a bit. Firstly, i'll give a little background on my setup. I'm running three mics: One cardioid to isolate the sound, one condenser for a little bit of crispness and a tube in the room. I am happy with the initial sound i'm getting running two of these mics (one compressed) from a processor into two separate analogue mixer channels and one mic directly(condenser) to a mixer channel. I then send all three of these mics out together bussed (one line) as a stereo pair (L&R), compress again, then to an external converter and go optical into a single track into my multi-track software. My question is would I be better off running more than one stereo pair to my converters (separate for each mic) into my software, recording more than one track simultaniously? I'm wondering if i'll achieve a slight bit better edge on my sound somehow that way.. or perhaps I should also compress the other two mics and stick to running them all together as one line into a single track. Thx for any helpful sugguestions, opinions or info from any knowlegable engineers. ~Jp, "The Box", Minnesota, US
Thats an awful lot of compression before you hit the recorder. Unless the performance is wildly out of control dynamically I would lose the compression before the conversion. In my opinion compression at that point does more harm than good to guitar sounds unless there is a performance related reason that demands it.
Well, first of all take into consideration the strength of the initial compression i'm using is minimal or sparing and then the fact that things sound worse when not also compressing before hitting the converters. As I said, overall i'm happy with that end of my sound anyways and I could easily give back any minimal dynamics lost compressing with a bit more eq on my mixer (if that were a problem). With that said, as for tracking each mic separately, firstly how many tracks/what method would you sugguest and second i'm still not sure expert opinion-wise if running all three mics together (as one line) is such a good idea when either A) Initially leaving a processor. B) Before they hit converters (bussed together from mixer) or C) Within multi-track software. thx for the response.
If the tracks are available each mic goes on its own track. If you only have two tracks I would blend the two close mics together on one and leave the distant mic on a seperate track to blend in the amount of room sound you need at mix time.
My question is, what are you going for. If it's an open, clean sound, then the compression is more understandable, but if this is a heavy distorted sound, then you're already getting so much compression from the amp and speakers that any more to tape is almost pointless.
Another thought is that when you say it sounds better compressed going in, is this solo or with the rest of the song. I find that what sounds good solo and what sounds good in the song are rarely the same with guitars, especially heavier guitars. Granted this is all song dependent, but something to take into consideration. Many times I've brought a solo guitar up in the monitors and had the guitarist say "wtf did you ruin the sound for" but when it's in the song, they understand.
As for mics, definitely track to seperate tracks if possible. You may find you need more of the "edge" you're talking about later on and be able to get it by just adding a little more of one mic, rather than EQing. Always try to get the sound right with the mic before going to the EQ. This is one of my biggest pet peeves with the new wave of "fix it in the mix" so-called "engineers". Sometimes it's inevitable, but if you just take the time, you can get it right with the mic(s).
Jp22 Recording Org Pro Audio Forums
Joined: Jul 10, 2005
Posts: 196
Location: Minnesota, USA
My question is, what are you going for. If it's an open, clean sound, then the compression is more understandable, but if this is a heavy distorted sound, then you're already getting so much compression from the amp and speakers that any more to tape is almost pointless.).
Compress a clean sound? Uhh.... sorry to break it to you but for the most part you're almost completely defeating the purpose of using compression doing that. Second, if "getting compression from the amp and speakers" is truely how you think your achieving truely compressed results, then I think you need your head examined. Third.... ehhh Mr. McCheese.... if you've even bothered to read my initial posts i'm not dealing with "tape"!
Quote:
Another thought is that when you say it sounds better compressed going in, is this solo or with the rest of the song. I find that what sounds good solo and what sounds good in the song are rarely the same with guitars, especially heavier guitars. Granted this is all song dependent, but something to take into consideration. Many times I've brought a solo guitar up in the monitors and had the guitarist say "wtf did you ruin the sound for" but when it's in the song, they understand.
To be perfectly honest, I actually agree with these people who
are asking you 'why did you ruin my sound'. Personally, I find
your theory of 'ruining a sound because it sounds better in the
mix' to be quite ludicris. You should seek professional help, soon.
Compress a clean sound? Uhh.... sorry to break it to you but for the most part you're almost completely defeating the purpose of using compression doing that.
Lightly compressing a clean guitar to even out the peaks and tighten up the dynamics is pretty common. Ask around on this one. Maybe you need to reexamine the "purpose of compression".
Quote:
Second, if "getting compression from the amp and speakers" is truely how you think your achieving truely compressed results, then I think you need your head examined.
No, you need to have your head examined. If you look at a distortion guitar wave form it's pretty much a solid block. Distortion by nature has an amount of compression in it. It's a clipping tube (given it's a tube amp) therefore the tube has reached it's maximum output, and is clipping the waveform. Any further increase in input level to the overdrive tube will only increase the minumum volume, not the already clipped maximum. This would decrease the dynamic range of the sound, which is EXACTLY what a compressor does. Thank you, play again.
Quote:
Third.... ehhh Mr. McCheese.... if you've even bothered to read my initial posts i'm not dealing with "tape"!
And if you had been doing this for more than two days with your "My mom bought me a studio in a box!" shitty attitude you'd understand that "to tape" is an expression that is used quite commonly, even when tape isn't being used. See, some of us have been doing this long enough to understand why there are razor blades and rubbing alchohol in a studio, and they aren't used for drugs (not all the time anyways). I guess some of us say it in rememberance of the days when there weren't a bunch of "OMG I AM TEH ENGEENEER WITH MY 'PUTER" idiots out there.
Quote:
To be perfectly honest, I actually agree with these people who
are asking you 'why did you ruin my sound'. Personally, I find
your theory of 'ruining a sound because it sounds better in the
mix' to be quite ludicris. You should seek professional help, soon.
To be perfectly honest, you don't have a ...ing clue. When you pull up a heavy rock mix and wonder why it's muddy as hell, just go ahead and leave those guitars just fine. I'm more than happy to suck the low end out of them to make room for the bass and kick. It's called mixing. Some songs require more work than others. The more elements in a song, the more you have to "make room" for each of them. "Ruining" the sound to make if better in the mix isn't "ruining" it, now is it. And for the record "Ludacris" is a no-talent, dime a dozen rap artist. The word you're looking for is Ludicrous. Learning to spell from rappers is like learning photography from the blind.
Last edited by McCheese on Wed Aug 03, 2005 4:20 pm; edited 1 time in total
Lightly compressing a clean guitar to even out the peaks and tighten up the dynamics is pretty common. Ask around on this one. Maybe you need to reexamine the "purpose of compression".
Compression doesn't "tighten up dynamics" imbecile, it clips the peaks, period. If anything it softens dynamics by shaving the peaks off and too much will destroy the dynamics, not "tighten" them. I agree with "lightly" but as for a distorted sound, i'm sorry but I don't care how right you think you are, your completely wrong, since the dynamics of an overdriven guitar (hence higher peaks) are at a lower threshold, naturally there needs to be more compression. People who say "don't compress distorted guitars" are idiotic. Thats completely false.
Quote:
No, you need to have your head examined. If you look at a distortion guitar wave form it's pretty much a solid block.
A solid block?!? Good god man, what an awful sight! I don't know what kind of distortion your referring to but i'd say if your seeing a "solid block" your sound is already completely destroyed!
Quote:
"Distortion by nature has an amount of compression in it."
This is also false, completely untrue and you don't know what your talking about. Distortion is distortion (fuzzy sounding, duh) and compression is compression (the clipping of peaking levels). Get a clue, they are two totally separate entities.
Quote:
"It's a clipping tube (given it's a tube amp) therefore the tube has reached it's maximum output, and is clipping the waveform. Any further increase in input level to the overdrive tube will only increase the minumum volume, not the already clipped maximum. This would decrease the dynamic range of the sound, which is EXACTLY what a compressor does. Thank you, play again."
Sure, i'll play again, heres another ...ing quarter: Thanks
for the mindless rhetorical rambling rundown of "what a
compressor does" (I didn't ask you for it to begin with!).
Quote:
And if you had been doing this for more than two days with your "My mom bought me a studio in a box!" shitty attitude you'd understand that "to tape" is an expression that is used quite commonly, even when tape isn't being used.
Used quite commonly by whom? People who say "tape" when they don't actually mean "tape"? Thats twisted. You need psychological help buddy. I created this post strictly laying out my details very well but what I got in return from you is a psycho version of "tape really isn't tape" and "distortion is really compression". Nutcase!
Quote:
See, some of us have been doing this long enough to understand why there are razor blades and rubbing alchohol in a studio, and they aren't used for drugs (not all the time anyways).
Yeah right, you and whos army.... you use razor blades and alcohol for what? Shame.....
Quote:
I'm more than happy to suck the low end out of them to make room for the bass and kick.
I think we already know "sucking" is one of your best features, theres really no need for any more details about your aftificial fake processes.
Quote:
It's called mixing. Some songs require more work than others. The more elements in a song, the more you have to "make room" for each of them. "Ruining" the sound to make if better in the mix isn't "ruining it, now is it.
As far as i've ever known, again, i've never had to "suck" anything out of a mix to acheive results. "Ruining" another musician's sound to achieve YOUR results in YOUR ego'd out mix is nothing but a self-centered statement from an overpaid washed up 'engineer' who likes to twist phrases into his own confused meanings. You aren't fooling anyone but yourself, Mr. McCheese.
Jp22 Recording Org Pro Audio Forums
Joined: Jul 10, 2005
Posts: 196
Location: Minnesota, USA
...and I could easily give back any minimal dynamics lost compressing with a bit more eq on my mixer
You're going to do what with what?
I do what needs to be done, not what YOU *think*. Don't mistake it and get your ego all in a knot again, its not about what you want, its about what I want.
Last edited by Jp22 on Wed Aug 03, 2005 4:50 pm; edited 1 time in total
I'm sure you had a great time learning to be an 'engineer' from the back of Guitar One magazine, but it's pretty apparent you don't even know what the words you use mean, let alone have a clue about how things work. Enjoy your time here, I'm done with you.
Jp22 Recording Org Pro Audio Forums
Joined: Jul 10, 2005
Posts: 196
Location: Minnesota, USA
Actually, I don't find Mr. "McCheese's" trollish antics to be funny one bit. Whether or not he or whoever thinks hes correct or not is unknown but just to clarify, I don't follow false interpretations or opinions of people (groups or otherwise) who always think they're correct when in reality they're not. I came here looking for simple answers on tracking with a few mics, not a debate on the properties of compression! Trolls seem to be common in forums lately, theres always some idiot screwing it up. Remember, THIS IS MY TOPIC, NOT MR. McCHEESE'S. I AM NOT OPEN FOR DEBATE.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
For more information on advertising, investing ,
merging
or any other ideas you may have for this community" Feedback
Pro Audio forums, Pro Audio Dealer, audio reviews and all the moderating here is
volunteer. Please remember no-one is being paid to be here or deliver
hot coffee. Play Fair, be polite, patient and considerate to others. Title your
topics properly and do not slander anyone, ever online. Read this before your post here:Recording
Org Disclaimer
This site can be translated into 13 languages. 錄音工作室幫助下，新聞和信息，數位專業音頻論壇, Opname studio helpen, nieuws en informatie, digitale pro audio forums, Studio d'enregistrement à l'aide de nouvelles et d'information, forums de l'audio numérique pro, Tonstudio helfen, Nachrichten und Informationen, digitale Pro-Audio-Foren, Estudio de grabación ayuda, información y noticias, foros de audio digital profesional. help, pro tools, cubase, nuendo, DAW, AD/DA, microphone, preamp, compressor, equalizer, Music Education, Arranging, Composing, collaboration des musiciens,
professionelle Musiker und Ingenieure,
colaboración de músicos profesionales y los ingenieros lo que pensamos acerca de una banda
