LinkBack URL
About LinkBacks
Reply With QuoteSample rate??
Midi Time Code rate??
Do they match?
Sychronization :(
I'm startingf an ambitious project in pro-tools with my old Boss BR-8 (Roland). Using a midi cable I am tring to slave pro-tools to the BR-8. I have had luck in getting the Br-8's transport to control the transprt in Pro-Tools. The big problem is that there is a playback speed difference with both systems. Pro-tools runs faster even though both tempos are the same. Does anyone have any tips for doing this in pro-tools? I have information flowing, but its appears to 'breakdown' when it hits pro-tools.
Here's what a BR-8 is:
http://www.bosscorp.co.jp/en/BR-8/
Thanx,
Mark
Sample rate??
Midi Time Code rate??
Do they match?
I'm using MTC at 30 ndf. Sample rate of 44.1. Things are not syncing up. I notice that the time on the br-8 will read hours, minutes, seconds then frames but the frames will be a decimal like 29.98 but pro-tools only shows time used, so an example would be 1:24.333 one minute twenty four seconds, but now theres a 3 point decimal wheras the other unit is divided to frames. This has me pulling hair.
MBOX 2 PRO FACTORY, PRO-TOOLS LE 7.3, LOGIC Pro,
Apple MacBook (Tiger), 2.16 GHz Intel Core 2 Duo
4MB shared L2 cache, 4 GB MEMORY, 120GB HD
Western Digital 250 GB EXT. HD.
KRK Rokit 8's & Reason 4.
Yes, Protools LE wont show timecode without DVToolkit, but the settings in Protools do match the settings (MTC and Sample rate) on your BR-8?
Also verify Protools isnt set for pull up/ pull down in session setup??
Posting Permissions
Bookmarks