| Author |
Message |
ging
Recording Org Pro Audio Group

Joined: Jul 05, 2006
Posts: 3
------------
Books To Read
Your Forum Posts
|
Posted:
Wed Jul 05, 2006 10:31 am |
  |
Hi,
I'm building a fairly small room in the basement of my house and I want to achieve the most isolation from the rest of the house as I can. I am mostly using it as a control room to do preproduction and mixing and some tracking. The dimensions I will be using is about 11x10x(almost 8'ceiling)
I know that's small and I will run in to some problems.
My first quesiton is, I 've been looking at products like IsoDamp that works with the construction. Is there any benefit to going that way. If so can I achieve the same results with standard materials.
What is the best kind of isulations for isolation in a staggard stud wall. I won't have room to do a double wall.
Any thoughts on maintaining isolation with the air intake and return would be helpful.
Also any thoughts on a good approach to dealing with getting the room sounding as good as it can when the walls are up and the room is isolated would also be greatly appreciated.
Thanks,
-ging |
|
|
  |
 |
ZZTop
Recording Org Pro Audio Group

Joined: Jul 03, 2006
Posts: 21
------------
Books To Read
Your Forum Posts
|
Posted:
Wed Jul 05, 2006 2:22 pm |
  |
R-13 insulation or mineral wool will work good for the price. Everything else is WAY too expensive. And double up the sheetrock.
Meaning that if you use 2 pieces of sheetrock the first piece should be 1/2" thick and the over lapping piece should be 3/4" thick. Reason being is that the resonant freq. are different in the various thicknesses, or any material for that matter.
And remember...sound in a room is just like "water in a glass". If there is a hole anywhere, the sound (water) will find a way out. So the tighter the seal the less the leak.
Good luck! |
|
|
  |
 |
jazzman_in_pa
Recording Org Pro Audio Group

Joined: May 12, 2003
Posts: 796
Location: Philadelphia
------------
Books To Read
Your Forum Posts
|
Posted:
Wed Jul 05, 2006 8:16 pm |
  |
| Quote: | | I want to achieve the most isolation from the rest of the house as I can. |
Then definitely consider a double-stud wall using narrower 2.5 inch metal studs, with a 1" gap between the two frames. That only adds 2.5 inches to the total thickness of the wall. You'll isolate much more bass than with a single-stud wall.
Lee |
_________________ http://www.asyougo.net |
|
   |
 |
ging
Recording Org Pro Audio Group

Joined: Jul 05, 2006
Posts: 3
------------
Books To Read
Your Forum Posts
|
Posted:
Fri Jul 07, 2006 10:09 am |
  |
Here are the plans for the studio. Any thoughts on how much room to leave for a bass trap where the entrance door is and the bathroom door.
I'm going to have to deal with the window I think. Would a window plug of some sort work?
Any other thoughts?
why isn't the image showing up? |
Last edited by ging on Sat Jul 08, 2006 10:15 am; edited 1 time in total |
|
  |
 |
zemlin
Recording Org Pro Audio Group

Joined: Sep 04, 2004
Posts: 1237
Location: Indianapolis, IN
------------
Books To Read
Your Forum Posts
|
Posted:
Fri Jul 07, 2006 8:50 pm |
  |
|
    |
 |
ging
Recording Org Pro Audio Group

Joined: Jul 05, 2006
Posts: 3
------------
Books To Read
Your Forum Posts
|
Posted:
Sat Jul 08, 2006 10:14 am |
  |
|
  |
 |
|
|