Air Circulation for Double Wall Isolation Booth?

Posted: Sat Aug 12, 2006 12:17 am

Does anyone have ideas on how to run air ducts into a two layer iso booth?

I am thinking that the vents in the internal wall should be opposite the vents on the external side (or underneath).

Also, what would be good circulation hardware to use for this application?

Posted: Sat Aug 12, 2006 6:02 am

Which iso booth?

If it's the gat box, I don't know how you could add ventilation w/o all that amp spilling out into the room without redesigning/rebuilding the box. Well, unless you were to back it up to a wall and fashion some sort of vent piping to it... in/out.

If we're talking the new vox booth, can you describe your existing HVAC system?

The reason being, that you want to introduce fresh air w/o loosing the isolation you just created by making it air-tight.

While no expert by any means, I'm right in the middle of designing my whole HVAC scheme. In my case, I'm mulling over putting a split unit in the booth. It requires a 3 inch "pvc" pipe to the outside. I'm contemplating changing the rigid pipe to a flex duct so I can put a double "S" in it... or push it through a plenum baffle on a floated platform above the booth.

Max

This topic sponsored by: