I donīt know exactly hou to implement a meter in my mic preamp...
Is it possible to put a meter before the first stage of the preamp, to measure the microphone input level?
In the outputs, I would like to know how to calculate the relation between:
Meter microvolts sensitivity
Resistor value to subtract line levels
Dbm Audio level
Is there a formula to calculate such things?
Sorry if you find this a silly question!
Thanks.
simple and quick answer ... NO :(Is it possible to put a meter before the first stage of the preamp, to measure the microphone input level?
0dBm=1mW across a 600 ohm loadDbm Audio level
+4 = 1.23 V ( 0 = 0.707 V ... ?? I've gone blank ?? )Meter microvolts sensitivity
Use a simple divider.Resistor value to subtract line levels
For more on this do check out the Home-made LA-2a VU meter thread.
http://www.recording.org/cgi-local/u...c;f=6;t=000951
Kev
DIY Factory
Bookmarks