Tascam DM24 user question

Posted: Fri Jan 09, 2004 9:13 pm

Hey all,

I'm trying to configure my DM24 for something that I thought it would do... I want to set channels 1-8 to be direct outs to the ADAT port. Then set 9-16 to be direct outs to the ADAT expansion card in slot one. Currently, 1-8 direct out works fine... However 9-16 outputs white noise. What can I possibly be doing wrong? A better question is; is what I want to do even possible with the DM24, and is anyone doing it???

Thanks,
John

Posted: Sat Jan 10, 2004 2:56 am

Hi John !

If your adat Card is in Slot 2:

shift-I/o Page Output

Buss1-8 /direct9-16 routed to Tdif2(1- Cool

/Slot1(trk9-16)/slot2(trk9-16)

Buss1-8/Direct1-8 routed to tdif3(1- Cool

/ Adat(1-

/Slot1 (17-24)/Slot2(17-24)

shift-digital Page slot
Slot2 (adat card) select trk9-16

I think this should work.

Greetz

Headtuned

Posted: Sat Jan 10, 2004 2:45 pm

You are correct, that should have worked. However, I encountered the same result. I'm starting to wonder if I have a bad expansion card?? Not quite sure how to determine that.

Posted: Sun Jan 11, 2004 2:59 pm

It worked for me together with a rme 9652 Soundcard via Adat-Connection switching Chanel 9 for example to "direct" on the channel assign.
Controlling the RME-Mixer-Software, i have a correct input on the second Adat-In (first ist connected to the normal Tascam-Adat-Connector)

Greetz

Headtuned

Posted: Sun Jan 11, 2004 4:21 pm

The rme 9652 is the same sound card that I have. I have no explanation at this point other than there must be a problem with my expansion card. I doubt that there is a problem with both expansion slots on my mixer, so I'll start with the card. I've posted this question on several different groups, and so far, no solution. Sad

<small>[ January 11, 2004, 09:24 PM: Message edited by: John Vice ]</small>

This topic sponsored by: