Got back my Auralex room assesment

Posted: Wed Mar 03, 2004 3:48 pm

Got a question about your line of diffusors. What are the differences between the metro, tfusor, and the minfusor. Using this on the ceiling of a drum room, and the back wall of a control room. Drum room is 14 ft by 16 ft and the control room is 14 by 18ft.

Posted: Thu Mar 04, 2004 7:34 am

Trojan,

T'Fusors
• 2'x2' diffusor with a max depth of about 6".
• Can be dropped into a ceiling grid.
• Our best performer - great 3D diffusion down to about 500 Hz.
• Perform almost exactly the same as RPG's Skyline in terms of diffusion coefficients. (Measured in accordance with AES-4id-2001.)
• High-density, thermoplastic material. (Can take a beating.)
• Can be painted with spray or brush.
• Extremely affordable. (About $15.00/ft².)

MiniFusors
• 1'x1' diffusor with max depth of about 5".
• Less complex design yields lesser performance than T'Fusors, but still decent 3D diffusion down to about 800 Hz or so.
• Same material properties as T'Fusor.
• Also extremely affordable. (About $8.50/ft².)

MetroFusors
• 2'x2' diffusor with max depth of about 2". (Not compatible with ceiling grids, btw.)
• Random design yields good (2D) diffusion down to about 1 kHz.
• High density EPS material - can also take a beating.
• Paintable with (low-solvent) latex paints.
• Class-A flame retardant.
• The most affordable of our diffusion offerings. (Less than $4.00/ft².)

(Note: Prices quoted here are estimated, based on our suggested selling prices. Contact your local retailer for exact details.)

More details can be found here.

This topic sponsored by: