UAD cards and plugs?

Posted: Tue Apr 29, 2008 12:35 pm

Link555 wrote:

I am under the impression that unless I run multi-treaded software the quad core is of no use to me.

Don't worry, you have a monster. Sooner or later you will need all the power.

Posted: Tue Apr 29, 2008 12:48 pm

lol- Yep I ran a few 24 track 24bit 96kHz test last night, she ran just fine!

Posted: Tue Apr 29, 2008 4:31 pm

Yeah, your cores will come in handy. Even if the software is single-threaded Windows and anything else can run on other cores.

And anyway, nothing wrong with having more than enough power. So long as it's financially acceptable I'd rather have more than less.

Posted: Wed Apr 30, 2008 10:11 am

oK here we go:
http://www.steller-studios.com/main/sound.php

I did two tests last night. One on acoustic GTR and one on female vocals.

Go to the link above and follow the steps below (also on my page), and let me know your thoughts!

1) Download the audio files.

They are big so it may take awhile. They 16bit 44.1kHz wave files. The NEVE 88RS was applied in Wavelab. The original files were recorded at 24bit 96kHz. I normalized both tracks to -3dBfs. I used the UV22HR dither to dither the bit rate down, and used Wavelab to down sample. No other effects were used.

2) Before you listen, download the text files.

These files explain what the parameters of the NEVE 88RS were set too. Just to be clear I wasn’t after any particular sound, I was just playing more or less.

3) Listen to tracks and follow along in the text file.

4) Let me know your opinions!

Posted: Wed Apr 30, 2008 12:16 pm

Oh and the credits are in the text file. But here is the artists in the clips.
Acoustic GTR part written and played by Chris Maskulak.

Vocalist is Brandeen Macdonald.

Posted: Thu May 01, 2008 7:30 am

bump- take a listen let me know your thoughts

Posted: Fri May 02, 2008 6:58 am

wow no one had a listen Sad

Posted: Fri May 02, 2008 8:59 am

Sorry dude...
i'll give it a listen later today.

Posted: Sat May 03, 2008 7:16 am

ok another question, on the UAD website it said I should be getting about 17 plugs running at 44.1kHz I am only able to run 11. What am I doing wrong?

This topic sponsored by: