| Author |
Message |
SixStringAudio
Recording Org Pro Audio Group

Joined: Oct 10, 2006
Posts: 6
Location: Austin,TX
------------
Books To Read
Your Forum Posts
|
Posted:
Sat Dec 02, 2006 11:30 pm |
  |
Anyone have any suggestions for capturing the best crowd response. I used a Crown Stereo PZM mic from the FOH sound board, sounded terrible. I'm considering NT-5s behind the speakers, aiming towards the crowd?
suggestions on microphones (preferrably under $400 for the pair), and placement.
Thanks,
Ryan |
|
|
   |
 |
twon
Recording Org Pro Audio Group

Joined: Jan 02, 2006
Posts: 97
Location: Melbourne, Australia
------------
Books To Read
Your Forum Posts
|
Posted:
Sun Dec 03, 2006 4:44 am |
  |
I have seen SM81's used around the front lip of the stage (assuming that it is raised) and pointing just straight out to the crowd.. |
|
|
  |
 |
djrr3k
Recording Org Pro Audio Group

Joined: Mar 04, 2005
Posts: 113
------------
Books To Read
Your Forum Posts
|
Posted:
Sun Dec 03, 2006 11:56 pm |
  |
Yo.
Not cheap, but I've used the Sennheiser MKH-800's with great results and more expensive shotty's. Find yourself a couple shotgun mics and set them up on stage facing the crowd (if your outside invest in the dead cat). I can post some links of live records/dvds I've done if you want to search the web for some trailers or samples.
Cheers,
-Ryan- |
|
|
  |
 |
Kev
Respected Past Moderator

Joined: Oct 26, 2001
Posts: 5414
Location: Melbourne, Aust
------------
Books To Read
Your Forum Posts
|
Posted:
Mon Dec 04, 2006 12:17 am |
  |
the Crown Stereo PZM may have worked better in a different position
however they are very omni directional so you will ge a lot of FOH in them
hang them over the audience with their backs to the PA
half way down the room
under a balcony ? |
_________________ Kev
DIY Factory |
|
    |
 |
moonbaby
Recording Org Pro Audio Group

Joined: Feb 23, 2005
Posts: 1991
Location: jacksonville,fl
------------
Books To Read
Your Forum Posts
|
Posted:
Mon Dec 04, 2006 8:53 am |
  |
I agree with Kev. The Crown PZM is very position-sensitive, but can make a great audience mic. You need to be sure that your connections are polarity-correct and that you mount the mic on the right plane. |
|
|
  |
 |
rockstardave
Recording Org Pro Audio Group

Joined: Mar 03, 2006
Posts: 272
------------
Books To Read
Your Forum Posts
|
Posted:
Thu Dec 14, 2006 9:07 am |
  |
akg c1000s
they're officially used to capture choirs -- big groups of people.
point one out towards the crowd from the stage and you'll be perfect. even better -- they can be phantom powered via a 9v battery! |
|
|
  |
 |
Scoobie
Recording Org Pro Audio Group

Joined: Sep 06, 2006
Posts: 171
Location: Nashville,TN
------------
Books To Read
Your Forum Posts
|
Posted:
Sat Dec 16, 2006 9:13 am |
  |
I also agree with Kev and Moonbaby, The crown pzm will work geat for audience mic. Like said, placement is crucial , you will get FOH in them. But will be usable when mixing.
I usally use my Oktava MK-012's . These work good also. I have two pair of these, bought a cheap pair from G.C. and a pair from Red Square Audio. The G.C. one's get used as audience mic all the time, That is about all their worth useing for!
A real good PZM mic...........SASS-P-MKIIH
I have used the Crown SASS-P-MKIIH to record a live acoustic show. Very good stereo image. It picked up the preformance and the audience real good. It was a writers nite, Open mic nite.
Peace................Scoobie |
_________________ Outback Muisc Productions
I'm not to old, That music really sucks |
|
  |
 |
|
|