Johns Track, I'll Be There - ITB vs OTB mix fest

Discussion in 'Track Talk' started by bigtree, Mar 17, 2012.

  1. bigtree

    bigtree Admin Has Studio Services

    Joined:
    Mar 20, 2000
    Likes Received:
    88
    Location:
    Prince George BC Canada
    Home page:
    Hey!

    JohnTodd has a new album out and there are some great songs on it! He was kind enough to allow me to play with this track "I'll Be There" So below is the journey.

    Kudo's John!

    ----------------------

    PLEASE NOTE: I'm doing this to engage us all, not to prove I am some mixing god etc. However, I also have some nice equipment so I thought it would be right on if I could help him out by trying to make it a little better. In the process, what a great way to engage people by sharing what I'm doing and to also welcome advice from our members too. I want to see this new forum "Track Talk" grow so I'm diving in ya all, all in the name of learning and having fun.

    This is such a beautiful song, I think it would make a great mix contest. But for now, this thread is a continuation of more mix's

    The Tracks:

    There are 30 tracks. Only 1 stereo drum track, a few guitars, a few keys, and a lot of vocals.

    Enjoy!

    EDIT

    Song completed, Who's Next?

    This thread is discussing mixing process with one of John's song. Its also part of the continued discussion I am preparing for with a Mix Contest ( not necessarily with this song).
    Most of the reference tracks in this thread have now been unfortunately removed to conserve Dropbox space, leaving way for future projects but my final mix prior to mastering is still online. I ended up using my own drum tracks and finished it off with a few analog goodies.

    Enjoy whats left of this discussion.
  2. bigtree

    bigtree Admin Has Studio Services

    Joined:
    Mar 20, 2000
    Likes Received:
    88
    Location:
    Prince George BC Canada
    Home page:
    John,

    Do you have the snare and kick on separate tracks that I could get? Right now they are only in a stereo track with cymbals and hats included. If I could get them on their own tracks, and center them , ooh, so much better.
    I have the SPL Transient Designer on the buss.


    The acoustic in the beginning. I've pulled out some lower mids that had a boxy sound to them. It sits in the mix better but after listening more, I'm going to HPF a bit more so the bottom end isn't so heavy. The Bass guitar will like that more.


    Vocals are thick in the lower mids so I pulled that out best I could and also HPF.

    So far that's it. Still working on this intro.
  3. djmukilteo

    djmukilteo

    Joined:
    Nov 23, 2008
    Likes Received:
    1
    Location:
    Rainy Roads WA USA
    No question which one is the OTB version.
    Even if I didn't know which was which....
    Everything just pops on that, very nice song!
  4. bigtree

    bigtree Admin Has Studio Services

    Joined:
    Mar 20, 2000
    Likes Received:
    88
    Location:
    Prince George BC Canada
    Home page:
    Ya, Don, your right with me here. awesome.

    Okay, I've taken a bit more HPF on the acoustic.
  5. bigtree

    bigtree Admin Has Studio Services

    Joined:
    Mar 20, 2000
    Likes Received:
    88
    Location:
    Prince George BC Canada
    Home page:
    Now a bit more on the electrics. stand by...
  6. bigtree

    bigtree Admin Has Studio Services

    Joined:
    Mar 20, 2000
    Likes Received:
    88
    Location:
    Prince George BC Canada
    Home page:
    HPF a bit more on electrics,
  7. bigtree

    bigtree Admin Has Studio Services

    Joined:
    Mar 20, 2000
    Likes Received:
    88
    Location:
    Prince George BC Canada
    Home page:
    yup, that is better.

    Still a slight low end in the vocal right when the bass hits it but its a trade off now. Leave it for now. I think we have a good start. Listen for a while now and think...

    thoughts?
  8. djmukilteo

    djmukilteo

    Joined:
    Nov 23, 2008
    Likes Received:
    1
    Location:
    Rainy Roads WA USA
    I don't want to get nit picky because this isn't my song and it's sounding fabulous so far....but
    at :25-:26 seconds on the vocal there's a delay echo of Johns voice?
    and at :35-:36 seconds there is a tick/click sound hard left....
    Just tell me to shut up...if that's out of line....but I am having fun listening to this stuff..duh
    And I'm watching the Formula 1 2012 opener on the telly in HD from Australia so I have nothing better to do between the commercials!
  9. djmukilteo

    djmukilteo

    Joined:
    Nov 23, 2008
    Likes Received:
    1
    Location:
    Rainy Roads WA USA
    Oh BTW when you get the new post email subscription, the Dropbox link shows up right there in the email and you can open or save it without even coming into the thread!
    Pretty cool time saver.....Hehe
  10. bigtree

    bigtree Admin Has Studio Services

    Joined:
    Mar 20, 2000
    Likes Received:
    88
    Location:
    Prince George BC Canada
    Home page:
    Shut up

    hehe, kidding... thumb

    NOTED on edits! We'll keep track as we go and deal with them later. Your comments are welcome indeed!

    I added some echo, but it needs to be tweaked there .. later on that.
    I'll listen for the tick. There is a few shrill bell sounds from the cymbal, I wish I could remove it for sure. Might need spectral cleaning on that one.

    Don, you are having too much fun! Thanks for the tip on the emai and some pointers.

    I've tweaked a bit more, I'm really liking it now. Great song! Time to take a break after this and come back on it tomorrow. Thanks for listening. Later...
  11. djmukilteo

    djmukilteo

    Joined:
    Nov 23, 2008
    Likes Received:
    1
    Location:
    Rainy Roads WA USA
    Haha...OK I'll stop...I know your having fun too!
    Great sound!
    The vocal is sweet and I hear what your shooting for with the vocal tail and that slight amount of reverb that will make those quiet milliseconds pop!
    Carry On!
  12. JohnTodd

    JohnTodd

    Joined:
    Mar 6, 2010
    Likes Received:
    6
    Location:
    Standing right behind you!
    AWESOME Bigtree! Very clean and 'forward'.

    Check the Dropbox folder, I put the MIDI file for the drums in there, and the individual audio renderings for each drum piece. Addictive Drums handles cymbals as overheads, so I wasn't able to sep out the different cymbals. On each track I turned off the EQ and compression settings.

    I didnt hear any ticks in the vox, but your ears are better than mine. Some ticks may be where I comped takes together.

    Oh boy! This is so much fun! I'm geeking out over here!.
  13. JohnTodd

    JohnTodd

    Joined:
    Mar 6, 2010
    Likes Received:
    6
    Location:
    Standing right behind you!
    Lyrics:

    There's a yearnin' in my heart for you dear.
    Night don't go by that I don't shed a tear,
    Day don't pass me by without a fear,
    That I might lose you dear.


    And so they say,
    It gets harder every day,
    But I’ll find a way to show my love to you.


    And so they say,
    The world will pass away,
    But I'll find a way to always be with you.


    I'll be there.
    Through tomorrows that will come
    I'll be there.
    Till the future is at one
    [with us my dear.]
    If the sun don't shine,
    The birds don't pine,
    If the oceans dry,
    And butterflies cry,
    One thing I can promise is,
    I'll be there.


    There's a glimmer in my eye for you dear.
    There's a flutter in my heart that you put there.
    I don’t know what I would do without you,
    'cause losing you, I couldn't bear.
  14. JohnTodd

    JohnTodd

    Joined:
    Mar 6, 2010
    Likes Received:
    6
    Location:
    Standing right behind you!
    That lead vox is with the Nady RSM4 ribbon, the bgvs are the MXL990 condenser.
    The BGvs are autotuned up the wazoo and compressed like a brick to get a 'Top 40-pop' sound. The intro acoustic is also with the RSM4, whereas the rhythm acoustics are the 990. The electrics are DI into Amplitube. The acoustic solo is actually the piezo on my acoustic! I normally hate that sound, but it just worked for this song.

    On my version, every track "without the word 'bass' in its name"* has 100Hz and below cut ruthlessly, then into a noise gate; drums excepted.

    There is a fade in on this song, and the intro acoustic has a temp-sync delay on it at the beginning, but never anywhere else.

    For the final MP3 release mix, all doctored up and 'mastered', check out this link:

    I'll Be There by John Todd | OurStage

    *ala Sir George Martin.

    Thanks for all your kind words!
    -Johntodd
  15. bigtree

    bigtree Admin Has Studio Services

    Joined:
    Mar 20, 2000
    Likes Received:
    88
    Location:
    Prince George BC Canada
    Home page:
    Ya, I have scratch 2, whew! lots of vocals (15 tracks) making this fun and challenging! Next the drums .. smoke
  16. bigtree

    bigtree Admin Has Studio Services

    Joined:
    Mar 20, 2000
    Likes Received:
    88
    Location:
    Prince George BC Canada
    Home page:
    Just passing on some updates.

    I removed a few vocal doubles and dup them instead. They were phasing a bit much to get them to sit right.
    In your reference mix the vocodor is there. Do you want a vocodor in it John? I think I like it without one. Suits this song better. I can do the T Bain effect if you like as well. Thoughts

    Feel free to comment on the harmony levels now. I'm going to start playing with them now. I worked on the first chorus most, well second one too lol. I like the lowest vocals up the most and the others just sightly below, like you have it. They have a unique sound. Before I start messing with the levels, thought it was a good time to ask some question and get some feedback :)

    I'll load the drums in tomorrow, thanks!

    I've done a few songs like this myself so it helped. Melodyne works wonders. Its not just a pitch correction, you can move volume levels and stretch words so easy. It works great on the low harmonies that are sometimes hard to Nail or sing as loud.

    PS.

    I think you could get this song published. Keeping it clean is a good idea for that. During mixing I get a lot of ideas. This is a good thing IMO, and what artists are drawn too.

    Cheers!
    Last edited by a moderator: Mar 18, 2012
  17. JohnTodd

    JohnTodd

    Joined:
    Mar 6, 2010
    Likes Received:
    6
    Location:
    Standing right behind you!
    My thoughts on the vocoder were this: This song was to be slightly 'ethereal'. When one contemplates the lyrics, one finds a deep, timeless love. The bgvs were heavily doubled to add power and mass, and then those 'extra' vocals didn't have any place to sit in the mix. The vocoder was put there for two reasons, 1, to differentiate them physically so they could be heard while competing with the other bgvs, and 2, the vocoder makes it sound more timeless and spiritual. To my ears, anyway. So those vocals that say "with us my dear" need something special on them. I used a vocoder to help compensate for my lack of engineering skills - but you can probably think of something better than that.

    As for all the vocals, I forgot to mention my use of the Waves Vocal Rider. I knew my engineering skills couldn't get the job done without assistance. :)

    This is wonderful! I love the way your gear sounds on the overall mix. It has something 'deeper' to it. It is smoother - and 'bigger'.

    Thank you for your kind words about the composition! If this were the old days, I'd issue it as a single with this as the B-side:

    What You Say by John Todd | OurStage

    Maybe we should remix this one, too! I always thought it needed more Bass Chicken! LMAO!
  18. bigtree

    bigtree Admin Has Studio Services

    Joined:
    Mar 20, 2000
    Likes Received:
    88
    Location:
    Prince George BC Canada
    Home page:
    Okay, thanks for your explanation on the harmonies. I'll try some magic on those!

    Can we talk about your gear and methods a bit while I'm working on your song?

    I've never used a Vocal Rider. I looked it over at Waves, seems pretty cool. They have a Bass Rider as well. Please share the process of that plug-in? Do they effect the sound of the vocals?

    I'd like to mention, I'm astonished on the sound you got from the Nady RSM4 ribbon! If I'm correct, that's an $80.00 mic! You have very done well with your gear and room. For a budget mic, I'd say that is a great choice because, lets assume you followed the norm and used a cheap LDC , it would have been pretty rash and boxy sounding compared.

    I hear some low mid areas in your room that translated into the sound of things.
    What do you have for acoustic treatment?

    Cheers!
  19. bigtree

    bigtree Admin Has Studio Services

    Joined:
    Mar 20, 2000
    Likes Received:
    88
    Location:
    Prince George BC Canada
    Home page:
    What did you use for Bass Guitar?

    I hear dimmer noise and buzz in your mix. How quiet is your system? Can you make it quieter?
  20. JohnTodd

    JohnTodd

    Joined:
    Mar 6, 2010
    Likes Received:
    6
    Location:
    Standing right behind you!
    For acoustic treatment of the room I used bare sheetrock with a layer of paint on it. :frown: I took mic stands and hung up blankets to make a booth, and put pillows behind the mic. Best I could do. I shut off the A/C and close everything up tight.

    The acoustic rhythm guitars were done with the MXL990. I think they are 1 1/2 feet from the guitar, with pillows behind the mic.

    The acoustic 'intro' guitar is with the Nady also, same distance.

    Everything else is DI or electronic. The Bass guitar is the V-Station bass VST plugin. I liked the round fat tone, but is it too fat? It's a MIDI track. I can upload the MIDI track if you would like to assign a new patch to it.

    The electric guitars are DI and then Amplitube.

    I quit using the MXL990 cheal LDC for lead vocals because of the raspiness. I sing leads hissy and spitty anyway for some reason; I got a ribbon mic because they are known for smoothing things out. So the ribbon mic is bringing my transients and esses down to normal, I think.

    Other than that, I use the PreSonus FP10, with its XMAX preamps. I have to crank them up to noisy levels get a good level on the ribbon, so I record the ribbon on the low side to avoid preamp noise and then normalize to raise it up. Just a workaround I invented out of necessity.

    The backing vocals were doen with the MXL990, because I wanted a bright, clear sound. I ended up EQing some of that back down!

    The Vocal Rider is a life saver for me. I don't think it colors the sound at all. What it does is act like a Superhuman Engineer and rides the faders super quickly to keep the track at an optimum level. At first I thought it was just another compressor, but it isn't. I don't really know how it does it's magic, but I do know I can hear a major difference in consistency with and without it. The are a little CPU heavy, considering you can't really assign one to a group. So for my 15-something vox tracks, there's 15-something Vocal Riders at work.

    I also ALWAYS put an EQ in the first VST slot set to HPF @ 100hz, then I ALWAYS go to a noise gate. This applies only to tracks recorded with a microphone. On the tracks you have from me, none of that is in there. I use the built in gate on the Amplitube channels, and then HPF100hz after that.

    As for dimmer noise, I have no dimmers. Might be something else on the circuit? I dont remember which guitars I used for this, but my home-made Telecaster buzzes like all get out. There is only one spot I can stand in the studio and not get buzz, and I have to bend over sideways to reach it! Suffice to say I usually just put up with the buzz! :frown:
    Last edited: Mar 19, 2012
Similar Threads: Johns Track
Forum Title Date
Affordable Recording Forum Glynn Johns/Recorderman with SM58s? Dec 31, 2011
Recording Vocals Jack Johnson's Mic? Aug 3, 2009
Affordable Recording Forum Attempt at Glyn Johns Method Jul 19, 2008
Song & Mix Collaboration New Mixes! Jack Johnson type acoustic music. Apr 11, 2007

Share This Page