Skip to main content

Integration of Ferrofish Pulse 16 to Patchbay

Hi, I'm Jonathan. I've been reading through the many posts regarding patchbay's, however I've not found the answer's I think I need.

I'm wanting to integrate a Ferrofish Pulse 16 AD/DA converter to a new patchbay in my rack pictured above. The interface I'm using is the USB Digiface.

SpectraLayers - new versions of old songs

I thought some might find this interesting. I've been using SpectraLayers for a while now, and I thought it might be fun to see if you could strip out the vocals from well known songs, and then do a totally new version of the song, and put back the original vocal. I can't stick this on youtube for obvious reasons, so it's sitting on my server at the moment.

Hard disc recorder that works with old mackie analog board

I have a 1995 Mackie 24.8  8 bus mixer, I'm tired of my DA88 tapes being chewed up and paying Tascam over $300 for repair, so can anyone recommend a 24 track hard disc recorder that will interact with the old Mackie board and hookup to it?  Someone mentioned the Alesis hd24 BUT a mix review on that said" the HD24 does not allow multiple track takes"  what does that really mean?

Beyerdynamic DT 990 Pro 250 ohm Review: A Critical Ear’s Companion Best Headphones for Mixing

In the quest for the ultimate sound experience, especially for tasks as crucial as mixing and mastering, one often encounters a myriad of choices. The Beyerdynamic DT 990 Pro headphones stand out as a notable contender among studio-grade headphones.

Bass on grand piano

Lately I’ve been experimenting with a 2 piece band.  Grand piano/drums/vocals.

I’m using a Shure beta 52 over the piano bass strings heavily lowpassed at 200Hz and sidechain gated to one of 2 contact mics attached to the underside of the soundboard. I’m using C-Ducers.   They give me rich sound.  I’m also adding a stereo pair of Behringer C2’s for air.

2007 APB Dynasonic Spectra T24i Right Channel Issue

I have a analog APB Dynasonic Spectra t24i that is a great sounding board but has developed an issue.  The right channel no longer returns any sound on any of the 24 channels.  Solo and all the Aux channels are perfect.  I've cleaned ribbon cables and replaced three fans in it.  It was dropped by the delivery company hard enough to crack the plastic on the side.

1970s vintage mixing desk power supply and origin

hi there everyone. i recently picked up this old mixing desk for a good price and ive been wanting to try and get it up and running and see what it sounds like. my first step is that i need to get a 4 pin power supply cable to power the unit and wanted to see if anyone knew exactly what voltage and everything something like this would need.