Results 1 to 5 of 5

Thread: "Muy rustico" studio design?

  1. #1
    Pro Audio Community
    Join Date
    Dec 2001
    Location
    Southern Oregon
    Posts
    221
    Liked
    0 times

    Default "Muy rustico" studio design?

    Howdy all,
    I was intrigued by the whole "building a studio- literally" thread. I too am looking at building a studio in a rural location, although my situation has some significant differences.
    I'm a creative musician living off the grid in Southern Oregon up in the hills. I built a one-room palace up here with good quality solar and hydro power. I have a great collection of great instruments (vibes, percussion, Hammond, great piano, and the usual acoustic and electric guitars, etc.), and a couple great players and songwriters. We have a backlog of several albums worth of good material, and while we're majorly itching to get a good CD out and hit the road for a while (it's been too long, homesteading and that), we will inevitably be doing several CD's of our own and producing/recording several CD's of other bands.
    The whole approach is having great sounding inspired performances to begin with and not doing much processing.
    We have a good colorful lively tracking space, with a variety of ceiling heights and very few parallel walls (I'm partial to live room reverbs), and have gotten some very pleasing results, but with no dedicated listening space/ control room it is exhausting just to try to monitor things.
    So we're looking at building a studio building adjacent to the cabin, mainly for control room but very likely also with a more dead (or more controllable) tracking space. I'm planning on using a masonry stove for heating (have one in the cabin- very even temperature and humidity- pianos and electronics cozy and dry), and either woodframe or strawbale walls with a healthy amount of masonry mass on the inside. Pretty much a barnlike-space-with-baffles approach.
    I have great affordable contractors to work with, real craftsmen, which is big plus.
    I'm not concerned about the zoning, which in my case is actually Forest Commercial. You can get away with a lot out here... it's better to ask for forgiveness than permission!
    I want to do this right, but must work very inexpensively. I'd like the vibe to be "muy rustico", lots of roughsawn wood and stucco.
    Any input? Where can I get good ideas for geat-sounding rooms and efficient design?
    Ted :w:

  2. #2
    Pro Audio Community
    Join Date
    Jan 2002
    Location
    Winchester, KY USA
    Posts
    78
    Liked
    0 times

    Default Re: "Muy rustico" studio design?

    Ted,

    I've been working with a great designer that has really good ideas and can work on a budget. He designed our studio and he was available for any number of questions along the way. Let me know if you would like to know more.

    Darren
    Dixon Digital
    www.dixondigital.com

  3. #3
    Pro Audio Inspired
    Join Date
    Dec 2001
    Location
    NY
    Posts
    13
    Liked
    0 times

    Default Re: "Muy rustico" studio design?

    Ted,

    This is one of the coolest idea's I have heard in a long time and something I really want to do. I'd suggest using straw bale as the structural material for the building and then constructing the internal acoustical devices yourself. things like Helmholtz resonators and diffusors can be made to look very rustic and still remain fully functional. Theoretically you could build cylindrical diffusors out of log halves. E-mail me if you want to chat more.
    Atticus
    Trust Company Recording Studio
    Daisy Mae Productions
    [URL=http://www.daisyaudio.com]

  4. #4
    Pro Audio Community
    Join Date
    Dec 2001
    Location
    Southern Oregon
    Posts
    221
    Liked
    0 times

    Default Re: "Muy rustico" studio design?

    I do! What's your address, Atticus?
    Other utterly perverse requirements:
    I'm lucky to be a quarter mile from a infrequently travelled road, and I have a ridge between me and my closest neighbor, plus I have a creek closeby for some lovely white noise masking most of the year. So I'm thinking I can avoid forced air ventilation and get some good mountain air flowing from outside. My only real sound insulation concern is to seperate tracking areas and control room.
    Also I insist on ample natural lighting. Nice to see some sky and tracking with a view is inspiring! I'm thinking deepset curvy irregular window wells, up very high and of course not opposite each other. Maybe clerestory style all on one side, and maybe one view window. I guess for natural light you could have all kinds of columns in front of the south windows, block the view but let in plenty light and the columns could double as thermal mass and bass busters.
    Ted

  5. #5
    Pro Audio Inspired
    Join Date
    Dec 2001
    Location
    NY
    Posts
    13
    Liked
    0 times

    Default Re: "Muy rustico" studio design?

    Ted,

    You can reach me at info@daisyaudio.com I'd love to chat about your ideas!!

Similar Threads

  1. More "Gene Autry" style/ "Sears" mic thi
    By BushmasterM4 in forum Song & Mix Collaboration
    Replies: 5
    Last Post: 07-25-2008, 04:58 PM
  2. Major low-mid issues in "semi-professional" studio
    By mark_van_j in forum Studio Construction & Acoustics Forum
    Replies: 1
    Last Post: 07-27-2007, 04:58 AM
  3. Mixer out "mono" to Computer sound card in "stereo"
    By Test Point in forum DIY Pro Audio Forum
    Replies: 4
    Last Post: 02-09-2004, 10:47 PM
  4. Custom part design "Rimu PCB"
    By Richard Hjemmen in forum DIY Pro Audio Forum
    Replies: 7
    Last Post: 01-24-2004, 09:37 AM
  5. "7th Circle Studios pres" or "Pats Pre"??? kits?
    By Paladyne in forum DIY Pro Audio Forum
    Replies: 7
    Last Post: 01-08-2004, 09:15 PM

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •