Results 1 to 8 of 8

Thread: API 212, Brent Averill / API 312, API 512 ?

  1. #1
    Pro Audio Community
    Join Date
    Jan 2001
    Location
    LA, CA, USA
    Posts
    156
    Liked
    0 times

    Default API 212, Brent Averill / API 312, API 512 ?

    Has anyone ever done a comparison between API's two preamp modules, the 212 and 512? And we might as well throw in Brent's version of the 312. I like the idea of a simple, straightforward preamp like the 212, without extras like multiple I/O, etc., and its also a couple of hundred cheaper than the 512. The big downside is that it doesn't fit in my 500 series rack empty slots. Brent's 312 seems like a good compromise in that it costs around the same as the 212 but fits in the 500 series racks. I don't know of anyplace that will set up all three for me to listen to (including a comfy chair and a few beers), but I'm gonna guess that they are all capable of sounding great with the right mic and certain sound sources. So how does somebody make the right choice among these three?
    Steve
    Lexington 125 - High Resolution Location Recording

    lex125@pacbell.net
    www.lexington125.com

  2. #2
    Pro Audio Inspired
    Join Date
    Feb 2001
    Location
    nyc
    Posts
    15
    Liked
    0 times

    Default Re: API 212, Brent Averill / API 312, API 512 ?

    you don't want api preamps... just leave'EM alone.

    email me privately where you saw a good deal on some so I can make sure NOT to go there.

  3. #3
    Pro Audio Inspired mchello's Avatar
    Join Date
    Mar 2001
    Location
    Baltimore, Maryland
    Posts
    5
    Liked
    0 times

    Default Re: API 212, Brent Averill / API 312, API 512 ?

    Would you care to say a bit more? What do you have against API pres?

    regards,
    Mark Chello
    Mark Chello

  4. #4

    Default Re: API 212, Brent Averill / API 312, API 512 ?

    <BLOCKQUOTE><font size="1" face="Verdana, Helvetica, sans-serif">quote:</font><HR>Originally posted by hollywood_steve:
    So how does somebody make the right choice among these three?<HR></BLOCKQUOTE>

    There are a couple of methods...one is "One potato, two potato, three potato, four...", another is "Eenie meenie miney moe, catch a tiger by the toe..."

    You really can't go wrong with any of them. The 312 and the 512 sound a bit different, but neither of them sound bad. They actually complement each other rather nicely.

    The 200 series stuff is rather convenient as it's smaller, so it takes up less rack space...but if you already have a 500 series frame, then I'd advise to get a couple of one, then a couple of the other. The order isn't really all that important which you get first and which you get later.

    As always, YMMV

  5. #5
    Pro Audio Inspired
    Join Date
    Feb 2001
    Location
    Manhattan, NYC
    Posts
    14
    Liked
    0 times

    Default Re: API 212, Brent Averill / API 312, API 512 ?

    Hello Fletcher and the rest of us,

    I have also been thinking about adding some API mic pres to my rig. I already have two channels of Neve 1089, V72, Tube Tech, and a Focusrite Red 1. Naturally, I'm looking for the API to be a role player at this point, and not an all around piece.

    Now come the adjectives.

    My current mental image of API (and what I want) is tight, kinda Neve like in its punchiness, but less "round" than a Neve, and different bite on the top (Neve more gritty marbles, API a little tighter and pointy?). I think of Steely Dan's Gaucho (which I have no idea what consloe was used) as sounding "API" like to me. I think of Stewart Copeland's drum sound or the sound of a Fender Twin. Tight, spanky, detailed, with tight bottom and plenty of open top, without too much airy sheen or a big warm bump in the lows.

    I'm guessing that I'll want to use the APIs for spanky drum mics. If I use them on the kick, I'll want the bottom to get through, but not be as hyped like it might be through the Neve.

    In this light, IF you can decode my random references into a catagory of sounds, which API am I likely to want? 512c, Averill 312, or 3124+? I know the 3124+ has 4 channels but if its the sound I want, I'm ok with it.

    I suspect that some of them sound more bottom heavy in order to be more generally useful as a pre for everything, and that another may have the sound I'm looking for.

    Any enlightenment to which model is more likely to be the one I want? Of course I will listen first, but if I can't do it side by side (likely with the Averill!), I might be happy checking out the most likely candidate, and buying it IF I like the sound, without having heard the others.

    Also, does the 3124+ sound just like the 512C? If so, I can take it off my list.

  6. #6
    Pro Audio Community
    Join Date
    Feb 2001
    Location
    Asheville, NC
    Posts
    197
    Liked
    0 times

    Default Re: API 212, Brent Averill / API 312, API 512 ?

    if i were to describe my 3124+, it would be the opposite of what your mental image is. warm, round, smooth and fat. kinda like butta. certainly not like the neve [at least what i have used] im looking for some neve pre's myself, i like neve on drums more than the api, but i like the api's on guitar a LOT. the Crane Song are my favorite pre i have come across. your mental image of what you think an api sounds like sounds like you are describing my flamingo. i find the api's too "soft" for the kick and snare and usually use my flamingo now with the overheads and room mics into the api to keep them from being overly harsh on the top end. of course i go to digital so the approach is different, i dont know what you are going to.

  7. #7
    Pro Audio Inspired
    Join Date
    Feb 2001
    Location
    Manhattan, NYC
    Posts
    14
    Liked
    0 times

    Default Re: API 212, Brent Averill / API 312, API 512 ?

    Thanks alpha!

    What you say about the 3124+ doesn't surprise me. My untested guess is that the 3124+ and the 512C are similar, both modern full sounding devices, and the Averil 312 will be the tighter one.

    For what its worth, when I describe the Neves as warm, I don't mean to imply that they lack top! To me warm just means having round bottom. The Neves certinly have a LOT of presence and character in the upper mids and top. I figure the APIs I want do too. The difference being one of personality, the Neves being throatier, and the APIs being tighter and edgier? Both having plenty of open top, and the API not missing bottom, but just not hyping it, sounding tighter. As tight as the Gaucho record, to as messy as a Stweart Copeland sound.

    Interesting that you like the Neves on drums, and the APIs for guitars, since I find that my Neves LOVE electric guitars, and the primary role for the APIs in my case will be to give the drums punch without making them too similar to the guitars. I figure rock vocals, percussion, pick bass, that kind of thing for the APIs.

    I'd love to hear more opinions! Especially on the similarity between the 512C and the 3124+.

  8. #8
    Pro Audio Community
    Join Date
    Feb 2001
    Location
    Asheville, NC
    Posts
    197
    Liked
    0 times

    Default Re: API 212, Brent Averill / API 312, API 512 ?

    i cant remember my opinion on the 512 when i used it last, i will have to dig out a recording to remember. i wasnt complaining though and enjoyed that session.

    the 3124+ is a dark sounding pre TME. i dont know how they sound compared to a 212. not much top end "air", the bottom is nice though.

    i like the neve on guitar as well, i like neve in general. an api is a good compliment to the neve, dont sound the same but deal with sound quite nicely, never flabby. yeah, i hear what you are saying about the more round bottom.

Similar Threads

  1. api 312
    By XYZ in forum Pro Audio Gear
    Replies: 1
    Last Post: 03-07-2006, 05:06 AM
  2. API 212 vs 212L - Any Difference
    By veatch in forum Pro Audio Gear
    Replies: 4
    Last Post: 05-26-2005, 07:57 PM
  3. Newbie API question (312 vs. 512)
    By AtticMan in forum DIY Pro Audio Forum
    Replies: 1
    Last Post: 12-01-2003, 07:35 AM
  4. API 512 or 212 schematic anyone?
    By JRE Productions in forum DIY Pro Audio Forum
    Replies: 12
    Last Post: 05-04-2003, 06:16 PM
  5. API 212/512
    By CFS in forum Pro Audio Gear
    Replies: 1
    Last Post: 03-26-2002, 06:22 PM

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •