1202fx how do I monitor vocals with effects and tape input while recording dry vocal?

Discussion in 'Tracking / Mixing / Editing' started by InsaneGenius, Feb 25, 2011.

  1. InsaneGenius

    InsaneGenius Active Member

    I have a little mixer called the Behringer Xenyx 1202 FX
    MESA_DE_SOM_BEHRINGER_1202FX_A.1000.jpg
    What I would like to do is monitor my vocals with the effects from the mixer along with the output from my computer's sound card through the headphone Jack on the mixer.
    But when recording, only record the dry vocals back into my computer. I have tried many things but nothing is really working.

    Anyone have experience with this?

    Here is more info on the mixer
    behringer.com/EN/downloads/pdf/1002FX_P0572_M_EN.pdf
     
  2. Kapt.Krunch

    Kapt.Krunch Well-Known Member

    Not enough info for an accurate answer.

    We know you have the mixer, and the computer that you are recording into, and monitoring from. We know you are monitoring the computer 'audio out' through the mixer. We don't know how you are recording INTO the computer, or if you are going into and out of the cheezy computer soundcard, or through an audio interface. We don't know what software you use to record your audio.

    I'm guessing that you want to play or sing through the Xenyx, into the input of a computer soundcard, and then want to monitor the recorded tracks from the computer soundcard out, and then through the Xenyx, while recording another track?

    Tell us more to possibly get an accurate answer. please?

    Kapt.Krunch
     
  3. iandyha

    iandyha Active Member

    your headphone output on your interface goes through channel 1.
    use the effect bused through your mixer. Out put of your mixer goes to your performer. through via headphone jack

    this will leave all the instrumentation on top of the VOX with whatever reverb effect you place on it. but it should deliver what you want. While still giving yourself a dry VOX performance to edit to your choosing.
     

Share This Page