1. Register NOW and become part of this fantastic knowledge base forum! This message will go away once you have registered.

A/D Converters

Discussion in 'Converters / Interfaces' started by EIK, Dec 14, 2003.

  1. EIK

    EIK Guest

    I'm looking to upgrade my converters. Any suggestions.

    I'm thinking about mostly 2 channel converters in the $1000 range.

    Some that I have looked at:

    -Lucid A/D 9624 (Several reports of something funky going on in the high-end that's not realistic.)

    -Mytek Stereo96 ADC (Read one report on RAP of "sterile sounding".)

    -RME ADI-8 (Not sure if this is pro gear.)

    -Swissonic AD96 mkII (I don't know much about this one.)


    Any input is appreciated.

    Thanks,

    EIK
     
  2. MisterBlue

    MisterBlue Guest

    I own the RME ADI-8PRO and quite like them. They are very good converters within my frame of reference but I have not been able to A/B compare them to the other ones you mentioned.
    They are a significant step up from the Delta's and similar and also easily beat MOTU stuff from what I hear.
    Still, nothing like a first hand comparison ...

    MisterBlue.
     
  3. Marcus Black

    Marcus Black Guest

    I´m thinking about getting the RME converters myself. I´ve been very impressed with what I´ve heard come out of RME gear. I think it´s a good choice.
     
  4. AudioGaff

    AudioGaff Well-Known Member

    From the choices you listed, I'd pick the Mytek.
     
  5. EIK

    EIK Guest

    Thanks guys.

    Are there any other converters I should be looking at in this price range?

    AudioGaff, do you think there's any truth to the Myteks being "sterile" sounding?

    Thanks,

    EIK
     
  6. AudioGaff

    AudioGaff Well-Known Member

    Define sterile sounding? How do you measure it or how are you able to tell when something is or is not sterile? If something is already sterile going in, then it should be sterile going out to be accurate. I think sterile is what you'd want in a converter as color, flavor and character should be done with other types of processing.

    Sterile is what others seem to label something when they compare it to the colored object that they own or use. So no, I don't think the Mytek is sterile if that is supposed to mean something negative.
     
  7. Roly

    Roly Guest

    Have a look
    cheers Roly

    http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=2580356021&category=41784&rd=1
     
  8. MisterBlue

    MisterBlue Guest

    The Mytek's are about 4 times as expensive as the RME's (which aren't exactly "cheap" either).
    If you got 5 grand to spend, by all means go for it and tell us if you think the Myteks are worth it. I am sure that they are very good converters and you will like them. Will the be better than the RME's? I don't know.

    Then again, if you are willing to spend that kind of money you might be able to take home both the RME's (they are BTW the same units as the much more expensive Nuendo's) and the Myteks and compare them directly at home. I'd be actually very interested to read a "field report" afterwards as I haven't tested the Myteks myself.

    MisterBlue.
     
  9. maintiger

    maintiger Well-Known Member

    What about the apogee rosetta A?D 96? That's in your price range and it sounds good... :D
     
  10. EIK

    EIK Guest

    re: sterile sounding

    I've seen lots of "pros" on RAP say that cheap converters sound cold and sterile.

    Many people there have asked how they can warm up their mixes and the answer has usually been "get new converters".
     
  11. ozraves

    ozraves Active Member

    You might try a Kurzweil Rumour. The converters are suprisingly good.
     
  12. bluebird

    bluebird Guest

    Lynx II... you can get it with: six in two out, four in four out, or two in six out.

    do a little reaserch on this and you'll find they are an exelent choice for aroud the $1000 range. I have one and I love it. I have only been able to compare it to cheap converters (digi 001) but the difference was pretty extreme. I read they are better than the RME stuff.
     

Share This Page