1. Register NOW and become part of this fantastic knowledge base forum! This message will go away once you have registered.

Advice on studio sound proofing

Discussion in 'Recording' started by AudioStar, Jun 17, 2008.

  1. AudioStar

    AudioStar Guest


    I’ve recently been looking into soundproofing solutions for our recording studio and was wondering if anyone has any tips on the best materials to use.

    The options so far seem to be acoustic board, or honeycomb foam. The foam is quite cheap on eBay, but is it any good?

    cd duplication & recording studio
  2. Greener

    Greener Guest

    As R. Gervais points out in this video:
    Some books are weird.
    But some are worthwhile.
    Look to the link on the left of this post entitled "Books To Read" you may find a book by another R Gervais to your liking.
  3. UncleBob58

    UncleBob58 Active Member

    I'm almost finished with the rebuild of my studio after it was flooded in April '07. My contractor used Celotex for sound insulation under the sheetrock.


    The room was so dead before the sheetrock was applied I am going to use 2'x2' pieces of Celotex covered with fabric as part of my room treatment. It's fairly inexpensive, about $15 for an 8' x 4' sheet, and an added benefit is that it is "green" (ecologically friendly).

    Pictures of my studio rebuild are here:


    The moldings, window and doors go in next week, followed by the carpeting, sound treatment and gear.
  4. Space

    Space Well-Known Member

    Isolation (the new soundproofing) is obtained with materials having mass, density and a few other heavy words.

    Foam (IF used is more part of the acoustics, which is different from isolation), on the other hand, is not always to be trusted and an extensive background search is advised on the product you are being "sold." Data is what you want, something that can make you a believer without someone sticking their hand directly into your pocket while giving an cogent analyzes.
  5. AudioStar

    AudioStar Guest


    Many thanks for your help people. We've got a company coming in next week, looking to expand the studio at the same time so should be good when its all done!


    audio & dvd replication
  6. Space

    Space Well-Known Member

    Thanks, this is very helpful and always interesting.
  7. bent

    bent No Bad Vibes! Well-Known Member

    Wow, Space - change that reply just a tad and we've got another Pin-knuckle.sys spam post!!!

    :lol: :lol:
  8. Space

    Space Well-Known Member

    Look over this thread and tell me what it is...
  9. bent

    bent No Bad Vibes! Well-Known Member

    I know, but I don't give a rat's ass about him...
  10. Space

    Space Well-Known Member

    So it's true, you DO give a rats ass about me!
  11. Codemonkey

    Codemonkey Well-Known Member

    I suspect something other than a rat?

Share This Page