1. Register NOW and become part of this fantastic knowledge base forum! This message will go away once you have registered.

all 8 inputs on the 002?

Discussion in 'Recording' started by rush_boy2112, Apr 27, 2007.

  1. rush_boy2112

    rush_boy2112 Guest

    Can you use all 8 inputs on the back of the digi 002 at the same time? that being the 4 xlr and 4 quarter inches?
  2. BobRogers

    BobRogers Distinguished Member

    Apr 4, 2006
    Blacksburg, VA
    Yes, you can use up to 18 if you use the ADAT and the S/PDIF.
  3. i used all eight in the digi001 so 002 can handle it..now if your hard drive is acting up you have a other problems then protools.
    Pro Audio Matrix
  4. JensenBohren

    JensenBohren Guest

    Yes, you can use the XLRs and the .5" at the same time. I do it regularly. I havn't been able to get the S/PIDF to work simultaniously, but the band decided not to play with the CD anyway and I was saved that embarassment.
  5. fourone3

    fourone3 Active Member

    Jan 17, 2007
    Aren't there clocking issues involved with using both the ADAT and S/PDIF simultaneously? Digi claims you can do 18, but not without limitations - from what I understand.
  6. Dosser

    Dosser Active Member

    May 31, 2005
    Nashville, TN
    To use the Lightpipe and the SPDIF at the same time, you have to be using one master clock for both, so you either need a device that has both, or set up to clock one A/D form the other or another master clock for both.

Share This Page