1. Register NOW and become part of this fantastic knowledge base forum! This message will go away once you have registered.

Analog --> Digital converter for RNP ??

Discussion in 'Recording' started by expatCanuck, Sep 17, 2008.

  1. expatCanuck

    expatCanuck Guest

    Greetings.

    If I have some modest mics (SM-57, SM58, AT-2020) feeding an RNP preamp, what would be a comparably cost-effective way to get the signal to the computer with decent fidelity?

    Thanks.

    - Richard
     
  2. GeckoMusic

    GeckoMusic Guest

    Because you already have a pre-amp, I would recommend the M-Audio Delta 1010LT. It has 2 balanced and 6 unbalanced line inputs. As long as you keep the run length short you should not have any noise problems with the unbalanced lines.

    Or if the thought of unbalanced signals near your CPU bothers you, check out the Delta 66 and Delta 44.
     
  3. expatCanuck

    expatCanuck Guest

    I don't yet have the RNP, tho' it's on my short list.

    Is there an alternative combination pre-amp / ADC you'd recommend?

    - Richard
     
  4. hueseph

    hueseph Well-Known Member

    For Mac there is the Apogee Duet. I don't think there is anything near equivalent for PC yet.
     
  5. GentleG

    GentleG Guest

    for a more modest price
    I would suggest the E-MU 0404 usb

    I have tried tascam and m-audio
    both don't have enough gain on the mic inputs
    and don't function standalone
    and have more troubles with groundloops and output noise

    the EMU has >60dB of gain
    is quiet and a standalone ad and da

    check their site
     
  6. BobRogers

    BobRogers Well-Known Member

    If you don't have a Mac and have not yet bought the RNP, I'd look for an interface that combines preamps and converters. There are a lot of good interfaces for the price of an RNP and an Apogee Duet (amost $1,000 total).

    I guess that an RNP/Duet/Mac chain might give you two channels that would be superior to any of the converters in that range. (At least it would be interesting to try.) But there simply aren't a lot of people out there going this route.

    For what it's worth, I have an RNP and like it. But it was not as different as I'd hoped from the preamps in my A&H mixer, Digi 002R, and Octopre. I now have a API 3124 and a Langevin DVC and these are a noticeable step up. If I had it all to do over again, I'd stick with the pres in my interface until I was ready to jump several price points.
     

Share This Page