1. Register NOW and become part of this fantastic knowledge base forum! This message will go away once you have registered.

Any Fireface 800 users?

Discussion in 'Recording' started by glitchless, Apr 1, 2008.

  1. glitchless

    glitchless Active Member

    I just sold off the old gear I knew so well. So now I'm committed to using the new fireface 800 with my Nuendo setup. In my previous setup with the Yamaha dsp2416 cards the hardware mixer and routing for the card could be accessed directly through Nuendo/Cubase. Changes could be made on the fly.
    With the RME the software routing matrix and mixer are accessed outside the recording and there use trigged the recording to halt.
    My Mackie controller is supposed to control both, but I've yet to figure how to switch between them.

    Any Ideas!
    Paul
     
  2. malika

    malika Guest

    I tried for using the WDM drivers and it still didn't work.It seems as if Vista is recognizing it and assumes it is working, It's just not putting out any sound.
     
  3. glitchless

    glitchless Active Member

    Sorry I haven't a clue what your talking about. I have sound and am not using vista.
    My issues with the Fireface software is that using it stops Nuendo, and using the Mackie to control it seems impossibly random.
     
  4. hueseph

    hueseph Well-Known Member

    I can't help but think there is a simple solution. There is an option in Nuendo to "release ASIO in background". Have you enabled that feature?
     
  5. glitchless

    glitchless Active Member

    Thanks I'll try that. I generally have it engaged so I can switch to Wavelab without having to close Nuendo.
     
  6. Link555

    Link555 Well-Known Member

    I am not sure if I can help. But I had 2 firefaces hooked up Nuendo 3. I used the ASIO drivers for the firefaces, and I was able see them in Nuendo. I had to do a sound card set up. before Nuendo could see the fireface though. Under options I think. But I never did get my mackie control to work right. I thought it was issues with Nuendo though. Since I have sold the firefaces.
     
  7. glitchless

    glitchless Active Member

    Do you still have the mackie controller setup with Nuendo?
    What issues do you have with it? I have this problem of faders deciding there own level even though I haven't programed them and haven't got the read light on. I'll pull down a fader and it will resist then pop back up after I let go. How weird is that?
     
  8. Codemonkey

    Codemonkey Well-Known Member

    Anyone else think malika = teh trollage?
     
  9. Link555

    Link555 Well-Known Member

    Thats was the exact problemI had too!

    I got rid of the mackie controller because of it. I though it was Nuendo.
     

Share This Page