1. Register NOW and become part of this fantastic knowledge base forum! This message will go away once you have registered.

Aphex 240

Discussion in 'Dual Compressors' started by audiokid, Oct 25, 2011.

  1. audiokid

    audiokid Staff

    ATTACH1343.vBATTACH
    BTwo Essential Audio Tools for Every RackB

    The Model B240B combines technologies of our Logic-Assisted gate and Easyrider automatic compressor.

    The Logic-Assisted Gate provides reliable, accurate, and stable gate operation. The patented design is designed to never false trigger, click or chatter. Once triggered, the gate progresses through its attack, hold and release sequence.

    The Model 240 is designed to have both the compressor and the gate work as a seamlessly integrated system. When the Logic-Assisted gate activates, the Easyrider compressor is prevented from releasing. This avoids the conflicting the compressor attempting to raise signal level while the gate attempts to reduce it. The gain reduction is frozen until the gate is opened again, avoiding level jumps.

    A front panel multicolored LED bar graph meter displays either peak output level or gain reduction.

    h=3Aphex 240's specificationshTABLE
    TR
    TD="width: 100%"BLINE INPUTS B

    Connector XLR-3F & 14" TRS phone jack each channel
    Type Balanced, may be used unbalanced
    Input Z 10KΩ nominal
    Maximum Input Level (MIL) +24dBu
    CM >70 dB @ 60 Hz
    Nominal Gain 0dB
    Operating Level Switched between -10dBV and +4dBu; channels independent
    BOUTPUT B

    Connector XLR-3M and 14" TRS Phone Jacks
    Type XLR is Impedance Balanced (may be used unbalanced); TRS is unbalanced
    Out Z Balanced XLR & TRS: 66 ohms
    Out Z Unbalanced XLR & TRS: 33 ohms
    Nominal Level Same as input, determined by operating level switch
    Maximum Output Level +25dBu Unloaded
    BCOMPRESSOR B

    Attack Release Program dependent, user variable release baseline
    Ratio 3:1
    Threshold Fixed
    Knee Medium Hard
    BGATEB

    Attack Variable, 4 uSec to 100 mSec
    Hold Variable, 5 mSec to 500 mSec
    Release Variable, 100 mSec to 1 Sec
    Threshold Variable -60 to +20dB
    Depth Variable, 0 to 80dB
    BGATE INSERTB

    Connector Type Send 14" TRS Phone Jack, Balanced
    Connector Type Return 14" TRS Phone Jack, Balanced
    Nominal Operating Level 0dBu
    Point of Insertion Between input stage and gate detector
    BANALOG AUDIO B

    THD <.01% @ +4dBu Out
    IMD <.01% @ +4dBu Out
    Freq Response (Flat) 5 Hz to 65kHz ±1dB
    BOTHER SPECIFICATIONSB

    Power requirements 85-250 VAC 50-60 Hz
    Power Consumption (max) 12 Watts
    Dimensions 19"W x 1.75"H x 8.25" D 1 Rack U (482.6mm x 44.5mm x 209.6mm)
    Depth Behind Front Panel 7.5" (190.5mm)
    Net Weight 6 lbs (2.73 kg)
    Shipping Weight 9 lbs (4.1 kg) TD
    TR
    TABLE
     

    Attached Files:

Share This Page