1. Register NOW and become part of this fantastic knowledge base forum! This message will go away once you have registered.

Apogee Duet and Studio Monitors Question???

Discussion in 'Monitoring & Headphones' started by Purpleb1982, Feb 24, 2011.

  1. Purpleb1982

    Purpleb1982 Active Member

    Jan 6, 2005
    I was wondering what cables i should use to hook up the studio monitors to the apogee duet... Balanced or Unbalanced?

    The duet has unbalanced trs outputs and the studio monitors have balanced trs inputs and balanced xlr inputs.

    Does it even matter or can it "HURT" anything?

  2. Boswell

    Boswell Distinguished Moderator Resource Member

    Apr 19, 2006
    Home Page:
    No, it can't hurt anything. My memory of the Duet is that it has a pair of jack sockets on the breakout cable that can be used as the audio output to powered monitors. However, I believe they are at -10dBV level (i.e. domestic level), and unbalanced, as you say. I have no information on whether the jack sockets are TRS with the ring actually grounded or just TS with the potential of the ring connection left floating.

    Anyway, if your monitors have enough gain on the jack inputs to deal with -10dBV levels, then the safe thing to do is to use TS jack leads, when the ring contact at the monitor end will automatically get grounded. If you are prepared to open up the Duet break-out cable and examine the jack sockets, or buzz them out using a TRS plug and a multimeter, you may find that they are actually TRS sockets with the ring already grounded. If this is the case, then you could use TRS jack leads to the monitors. You will notice no sonic difference.

Share This Page