1. Register NOW and become part of this fantastic knowledge base forum! This message will go away once you have registered.

audio interfaces?

Discussion in 'Converters / Interfaces' started by bezzler, Jan 10, 2007.

  1. bezzler

    bezzler Guest

    Hi all, i am kinda new to all this and need some advice..
    I run a G5 imac with logic 7 and have acquired an old allen & heath 16 channel desk.. question is which interface to go for.. Obviously dont need pre-amps, just 16 channel audio..

  2. gdoubleyou

    gdoubleyou Well-Known Member

    Any of the Motu eight channel interfaces should work, you would have to add preamp with adat out to get 16 channels.

    there would be a redundancy of preamps though.

    SM pro audio has several devices that could connect to any interface with ADAT I/O.

  3. pr0gr4m

    pr0gr4m Well-Known Member

    A MOTU 828 MKII will give you 10 analog inputs (with 2 mic pres) and a connection for 8 more inputs via ADAT. So pick up an AI-3 for those additional 8 and you're good to go.

    It's what I use and works well for me.
  4. Jeremy

    Jeremy Active Member

    Or you could just use a motu 24i/o not the confused with the motu 24i expansion interface. 24 ins, 24 outs. sounds like this might work for your situation, because there is no preamps other than the feed from your mixer.

Share This Page