1. Register NOW and become part of this fantastic knowledge base forum! This message will go away once you have registered.

AudioBox USB Active Instrument Inputs

Discussion in 'Recording' started by mxjoel165, May 30, 2009.

  1. mxjoel165

    mxjoel165 Guest

    I have a audiobox usb, and your not supposed to hook up an active instrument into the front instrument input, but a "line" input, but, i have a Boss multi effects pedal for my guitar, and sense it has an onboard pre amp, i cant plug it into the from connections as is.. or, can i? just wondering what i need to do :)
    thnx
     
  2. jg49

    jg49 Well-Known Member

    Most guitar effects pedals are designed to be plugged into a guitar amps input hence are typically instrument level. They often have an output control which you may want to be sure is set to a lower level less than half above 25%. If the signal is not clipping at moderate gain settings on the the audiobox you should be fine. I plug my Korg effects pedal in this way all the time, same with distortion, chorus, etc.
     
  3. Boswell

    Boswell Moderator Distinguished Member

    Just plug it into the jack (instrument) input and use the gain control on the Audiobox. It should work fine.
     

Share This Page