1. Register NOW and become part of this fantastic knowledge base forum! This message will go away once you have registered.

Audiophile 2496 Recording Question

Discussion in 'Recording' started by ra990, Jan 29, 2006.

  1. ra990

    ra990 Guest

    Hi All,

    I am running into an issue when trying to record. Here is my setup:

    Audiophile 2496
    Steinberg VStack running a few VST instruments
    Adobe Audition

    VSTack is configured to route sound to the second bus on the soundcard
    Audition is setup to record the input from the soundcard monitor mixer

    HW analog outs from the soundcard are going to my speakers.

    Now here is the problem, I am running the metronome on Audition, and I can't figure out how to record the output of the VSTi without also recording the clicks.

    I can mute the bus the clicks are on (the first bus, different from what the VSTi is on) through the monitor mixer, but then I can't hear them either!

    I'm sure I'm not the only one trying to use a single DAW for both playing and recording. So what is the right approach?

    Any help is appreciated!
     
  2. IIRs

    IIRs Well-Known Member

    I'm not sure that Audition is the best choice of software frankly: a DAW which records MIDI data and hosts VSTis internally could replace Audition and V-Stack, and make your life much easier!

    I use Tracktion :)
     
  3. ra990

    ra990 Guest

    I thought I had the perfect solution to my problem. This involved connecting the Audiohiles SPDIF Out to its own SPDIF In. However, this doesn't work for some reason. Nothing is detected on the IN port this way.

    Is there any reason why I shouldn't be able to connect its digital out to its digital in, when I will only be monitoring one of them?
     

Share This Page