1. Register NOW and become part of this fantastic knowledge base forum! This message will go away once you have registered.

Automating a Modular

Discussion in 'Recording' started by try2break, Mar 28, 2001.

  1. try2break

    try2break Guest

    I'm sure it can be done but I'd like confirmation.
    Would it be possible to automate the functions of an Analog Modular Syntesizer (AMS) using CV to MIDI and MIDI to CV converters and using a MIDI sequncer to drive it all? For example, say I wanted to automate a filter sweep. I would plug a cable into the Voltage Control input of the filter and connect it to a MIDI>CV converter, sequnce the sweep on the computer, then play it back using the MIDI>CV converter into the Control Voltage input on the filter.
    Will this work? That way I can have a VERY large Memory Moog using a Synthesizers.com Modular, various CV>MIDI and MIDI>CV converters, and a computer or a standalone sequencer. Sounds like fun.
  2. Nate Tschetter

    Nate Tschetter Active Member

    Feb 28, 2001
    Hi try

    Sure, it will work in theory...the theory part being if your synth responds to the voltage that the MIDI to CV controller sends. If so, everything should be cool.
  3. regebro

    regebro Guest

    Sounds like fun indeed! Although it willprobably be cheaper and easier to buy a Nord Modular... :)
  4. try2break

    try2break Guest

    I don't mean to offend you if you like the Nord, but I think it sounds like butt. I want a pure analog modular. Nothing else will do.

Share This Page