1. Register NOW and become part of this fantastic knowledge base forum! This message will go away once you have registered.

Best DI 4 Recording Acoustic Bass

Discussion in 'Bass' started by hubercraft, Oct 31, 2007.

  1. hubercraft

    hubercraft Guest

    I need a good DI for recording an upright Bass
    anyone know of a good DI?
  2. BobRogers

    BobRogers Distinguished Member

    Apr 4, 2006
    Blacksburg, VA
    What are you using for a pickup? Try a Countryman....aaaaiiieeeeee I can't take it! Can't give a short answer!

    Seriously, this is a huge can of worms you are getting into. We're talking to holy grail here. No one knows the mystical secrets of amplifying/ recording the upright Bass. (And it's the BASS damnit. Nothing else qualifies. The slab is an ELECTRIC bass.) Check out the acoustic forums on talkbass.com and prepare to read for a month.
  3. RemyRAD

    RemyRAD Guest

    Sep 26, 2005
    Sans Amp DI for bass. Not too expensive with a sweet sound. You certainly want a superhigh impedance input to prevent loading down the pickups. So something with a JFET input should do the job fine. Just make sure that whatever pre-amplified DI you use, make sure it doesn't have a transformer input and is well beyond a 50,000 ohm input, which ain't enough. That's fine for keyboard thingies.

    Of course then, you'll want a limiter as well. Just remember, you'll want to press all four buttons on an 1176, if you can't afford one, even if the meter gets spastic.

    Spasticley yours, yours, yours, oh baby!
    Ms. Remy Ann David, David, David oh baby!

Share This Page