1. Register NOW and become part of this fantastic knowledge base forum! This message will go away once you have registered.

best way to clean dust from slider slits and inputs

Discussion in 'Recording' started by grodinsky, May 11, 2008.

  1. grodinsky

    grodinsky Guest

    have a mixer that has been sitting for a while and collected a lot of dust. just wondering what you folks use to clean dust from the inside of slider sluts and other inputs. compressed air? thanks!
  2. grodinsky

    grodinsky Guest

    slits not sluts! haha
  3. Space

    Space Well-Known Member

    Just as a point of reference, if you already have dust in this device your goal wouldn't be to push it in even further would it?
  4. mhutch

    mhutch Guest

    I don't have any experience with this, but from a google search on the subject:


    http://www.catapult.co.uk/products/DJ Equipment/Spare Parts %2F Cleaning %26 Care/Aero+Klene+50

    Somewhere to start anyway...
  5. Space

    Space Well-Known Member

  6. zemlin

    zemlin Well-Known Member

    uh ... spray contact cleaner is not going to do much for dust ...

    I'd use something like a horse hair dusting brush. The one I have from my drafting classes many years ago works well.

    TPS311016DVBR datasheet
  7. grodinsky

    grodinsky Guest

    thanks for the links and the um hum
  8. Space

    Space Well-Known Member

    once the sluts left I lost all interest..
  9. Codemonkey

    Codemonkey Well-Known Member

    I was more interested in whats under my faders lol...
    I noticed today channel 4 is crackling...but NOT at the PFL stage...and since our mixer is never covered, I'm not surprised.
    Gonna get some cleaner tomorrow hopefully.

Share This Page