1. Register NOW and become part of this fantastic knowledge base forum! This message will go away once you have registered.

Broken Beyer Dynamic M201

Discussion in 'Microphones' started by MiniMario, Nov 13, 2013.

  1. MiniMario

    MiniMario Active Member

    Hi all!

    I have a Beyer Dynamic M201 but some wires have become unsoldered.
    I can't seem to find any photos of the microphone in pieces so thought I'd ask on a forum
    Do you know where I would solder the wires onto?


    Attached Files:

  2. TheJackAttack

    TheJackAttack Distinguished Member

    Yhe ground solders to the housing but the wires go through the tube into the capsule. They are broken not unsoldered.

    Sent from my SCH-I535 using Tapatalk
  3. MiniMario

    MiniMario Active Member

    What is the shiny metal pin sticking out for? How would I go about fixing this microphone then? Is the tube the thing with the hole? Sorry I don't know a lot about microphones.
  4. MiniMario

    MiniMario Active Member

    This piece is ok? Yeah?


    But this one... grr


    Attached Files:

  5. TheJackAttack

    TheJackAttack Distinguished Member

  6. Kurt Foster

    Kurt Foster Distinguished Member

    if i were you i would find a competent tech in the area and have them repair the mic.

    201's are great mics and as such deserve a little quality attention when needed.
  7. pan60

    pan60 Active Member


Share This Page