1. Hey, good to see you lurking here! If you are into recording, love using microphones (Tracking, Mixing or Mastering Music) , you want less hype and nonsense... perhaps you've found your new home. Discover more... Welcome to RECORDING ORG (est 1998) - created for musicians by musicians. Register NOW !

building own rack / rack rails?

Discussion in 'Studio Acoustics Forum' started by fevers_mirrors, Apr 14, 2004.

  1. fevers_mirrors

    fevers_mirrors Guest

    Reviews:
    0
    im starting construction on my equipment racks for my studio. they will be fairly basic "rectangle" design, painted 3/4" mdf.

    im looking to see if anyone knows a place online that sells rack rails for a cheap price.

    so far the best ive got for 18 space, is $26.95 from markertek.

    any leads would be appreciated, thanks!
     
  2. Paul Woodlock

    Paul Woodlock Guest

    Reviews:
    0
    Greetigns Fevers

    Although I can't help with a supplier ( being a UK dude ), I Must say that seems very expensive.

    When I made my racks a few years ago, I bought a bunch of aluminium rack strips. it came in 6 foot lengths, and even allowing for inflation it would only be about 15 shekels a length.

    Aluminium, of course, is also much easier to work with than steel.


    Paul
     
  3. fevers_mirrors

    fevers_mirrors Guest

    Reviews:
    0
    anyone else?

    any alternative materials that can be used?
     
  4. Barkingdogstudios

    Barkingdogstudios Guest

    Reviews:
    0
    Fevers,

    Go here, it's where I get all of my rack components, speaker corners, etc.

    https://www.tchweb.com/cgi-bin/TCH2.storefront/4072a30605a91426273f0a0000360571/UserTemplate/1

    These guys have an outlet in Toronto but I also think they have one in Buffalo. There's a pre-tapped piece of rail (42 spaces) for $17.21 USD. You'll need to cut it, but that should be easily done at any auto spring shop or anyone who has a metal-cutting saw. I've used my home shop electric mitre saw with a metal-cutting blade, but I prefer to do it where I don't risk setting the shop on fire!

    The only thing you have to pay attention to is where you cut these pieces of rail. They are in a pattern that has to be followed and made the same for both rail sides. Otherwise the holes don't match up.


    Also, I'm not sure if you already knew this or not but don't make your 19" rack exactly 19" wide. Make it 19 1/8", otherwise some components will be a tight fit.
     
  5. aaronwiles1

    aaronwiles1 Guest

    Reviews:
    0
    If you use wood, you won't have to worry about grounding issues.

    Or here's a link. I don't know if you will have to set up an account, but here you go:

    http://www.lowellmfg.com

    or search google for middle atlantic stuff.

    Aaron
     
  6. loudcity

    loudcity Guest

    Reviews:
    0
    ebay

    Ebay - I saw 18 space rails with a buy now price of $19.50...
     
  7. ironsheik

    ironsheik Guest

    Reviews:
    0
    Go here. I think these guys are pretty damn good:
    http://www.elcomhardware.com/

    The site is a bit annoying but they've got a ton of stuff you didn't even know you needed.

    Josh
     

Share This Page