1. Register NOW and become part of this fantastic knowledge base forum! This message will go away once you have registered.

CAD 22 microphone

Discussion in 'Microphones' started by polunga, Aug 21, 2008.

  1. polunga

    polunga Active Member

    Hi everyone...not really sure this is the right section to post this (if not, move where needed)

    I'm using a "CAD 22" microphone as amp mic and i wanted to know whether it was a good choice and whether it was a good microphone

    Thanks :-?
     
  2. RemyRAD

    RemyRAD Well-Known Member

    For putting on a guitar amplifier, probably not awful? When recording rock-and-roll, many of us utilize the Shure SM57/58. This appears to be similar microphone in type. So it will probably to a more than adequate job for you. It's certainly won't overload. Very few dynamic microphones overload from excessive sound pressure level. Although I am not intimately familiar with, nor have I used this particular microphone, it should be perfectly adequate.

    A reasonable choice for putting on guitar amplifiers, drums, vocals.

    What I'd like to know is, where's my pizza?
    Ms. Remy Ann David
     

Share This Page