1. Register NOW and become part of this fantastic knowledge base forum! This message will go away once you have registered.

Chipmunk recording with SX3

Discussion in 'Recording' started by RayNor, May 18, 2005.

  1. RayNor

    RayNor Guest

    First post here.

    I'm running SX3 in a P4 3200 w 1G ram, M Audio 1010lt card.
    I need to record an online training chatroom for my work. When I open the page the voice is fine, but when I open Cubase to record it it turns to a chipmunk voice.
    I cam manage a workaround by starting record, then returning to the chatroom page and open up the virtual chalkboard. But I cannot return to Cubase or...chipmunk again.

    All other recording of 'external media' have worked fine. But this recording the DAW with the DAW isn't working well.

    Sample rate of SX3 and the sound card is 44.1.

    Any ideas?
  2. jonnyc

    jonnyc Guest

    I had a problem with all my audio playing back like a chipmunk, turned out to be a driver problem. But I'm a ptle user now so its not a problem. Just make sure you're using the right asio or whatever its called.
  3. BobbyDrake

    BobbyDrake Guest

    Just a newb, but I had a similar situation. I found out I recorded it at one sample rate and was playing it at another. Make sure the sample rates match.
  4. blaumph2cool

    blaumph2cool Active Member

    May 2, 2005
    Portland, OR
    ran into this issue awhile back too...i was recording at 24-bit and then editing the wav file in another application that was 16-bit.

  5. tedcrop

    tedcrop Guest

    It sounds to me like you are opening a wave file that is recorded at a different sample rate than your player. Try switching around the sample rates in cubase.

Share This Page