1. Register NOW and become part of this fantastic knowledge base forum! This message will go away once you have registered.

'clicking' noise with Logic Studio

Discussion in 'Logic' started by bushido, Jul 12, 2009.

  1. bushido

    bushido Active Member

    Hey everyone, been having an issue with a on and off 'clicking' noise in Logic Studio that I've never heard before, it sounds almost like its clipping but the thing is there is no signal being recognized in Logic, when trying to record a track the sound will come through the speakers but not be recognized and when stopped there is no playback. It was working fine before and just started when i fired it up the other day. Can anyone help?
  2. bushido

    bushido Active Member

    Clicking Noise

    To Add,, not sure if this could be related to a sample rate issue, so i've heard at least, wondering if there are any basic guidelines?? really need help! lol thanks
  3. Guitarfreak

    Guitarfreak Well-Known Member

    logicprohelp.com :cool:
  4. jg49

    jg49 Well-Known Member

    Yeah, try setting the sample rate to whatever the max that the program allows and see if the clicking disappears. If it does and likely it will, start reducing the rate incrementally until the problem begins again. You should then have a pretty good idea what the lowest you can set it without problems.
  5. bushido

    bushido Active Member

    Thanks to both! ill give that a shot

Share This Page