1. Register NOW and become part of this fantastic knowledge base forum! This message will go away once you have registered.

computer recording

Discussion in 'Recording' started by punkrcker32, Mar 5, 2006.

  1. punkrcker32

    punkrcker32 Guest

    ok i want to be able to record 8 to 16 mics simultaneously to my computer, if possible i would like to be able to do pre eqs and pans that are sent along with the audio to the computer via firewire or usb. Along with this i want to be able to control at least 4 earphones and 2 sets of monitors and sub and a talk back mic so basicaly a control room surface. and last but not least i want to be able to control cubase sx3 with a controler so i can mix, eq, and do paramters for my effects. HOW WOULD I BE ABLE TO DO THIS (WHICH EQUIPMENT). Is there an all in one, or are would i have to buy seperate componets to be abel to do this.
  2. pr0gr4m

    pr0gr4m Distinguished Member

    Feb 9, 2005
    South Florida
    Home Page:
    You will need separate equipment but some things can be consolidated into one.

    To make things easiest for you you might want to look at a device like the Tascam FW-1884 which will somewhat satisfy your input/output needs as well as give you a control surface to interface with Cubase. if you need/want more channels, it is expandable. EQ and panning and that sort of thing are all handled by Cubase.

    You say you want a Sub output...I'm guessing a subwoofer? Unless you are mixing for something like 5.1 then the subwoofer can be part of your monitoring solution and only requires your stereo output. To be able to switch between monitors, you'll need to have some sort of switching device like the Presonus Central Station. Since you are just starting out, you may want to look for alternative cheaper or DIY solutions.

    For your headphones, most headphone mixers are ok...yes even behringer will work for this, but if you want to bring it up a notch (BAMM!)look at the Mackie heaphone mixer HMX-56. It's nice if you have lots of input sources.

    There ya go. Three devices that will get you on the road to where ever it is you are going.
  3. DreX

    DreX Active Member

    Mar 17, 2006
    Im alittle new to this but would the Mackie Onyx 1640 ( http://www.mackie.com/products/onyx1640/ ) not be a good solution to alot of what you want to do? I have a 1620 witht he firewire I/o card and love it so far....built in talkback with option to use ur own mic or the one built into board, has 4 sub outs, the firewire I/O card allows you to send 16 individual channels to ur comp, as well as recieve a stereo channel from the computer to the mixining board thru the control room outs for monitoring, the pre-eqs sound really nice with good control. only thing u'd really need is a headphone splitter to connect more headphones....

    good idea bad? let me know.

Share This Page