1. Register NOW and become part of this fantastic knowledge base forum! This message will go away once you have registered.

Connecting Logitech z-2300 to Audiobox 2x2 USB....is it possible?!

Discussion in 'Recording' started by robg_88, Feb 13, 2013.

  1. robg_88

    robg_88 Active Member

    OK guys,

    Question is in the title.

    Basically looking to connect my Logitech sub and speakers to my Audiobox USB.

    Is this possible? If so, What type of leads/adaptors are required?!

  2. Boswell

    Boswell Moderator Distinguished Member

    It's not completely straightforward as the Audiobox output is professional level balanced and the Logitech speakers are domestic level unbalanced. Even if you take an unbalanced output from the Audiobox it could well overload the inputs of the speaker system.

    Commercial balanced-to-unbalanced converters are expensive, so are you handy with soldering? I could give you the diagram of a simple circuit using only connectors and resistors that you could wire up and see if it works adequately for you.
  3. pcrecord

    pcrecord Don't you want the best recording like I do ? Well-Known Member

    Logitech z-2300 are a tuff, I once use it in my car as a sub (without the satelite speakers) with a power inverter... Boswell is right about the balanced signal.
    But, I wouldn't be scared to use a adapter 2 x 1/4in mono to 1/8in female. As long as you don't crank up the audiobox output higher than -10db

Share This Page