1. Register NOW and become part of this fantastic knowledge base forum! This message will go away once you have registered.

Control 24 question

Discussion in 'Recording' started by hafsteinn, Jan 10, 2007.

  1. hafsteinn

    hafsteinn Guest

    I just read that Digi control 24 arent compatible with digi 002, how does the mixer interact with protools?
     
  2. gdoubleyou

    gdoubleyou Well-Known Member

    The biggest limitation is in the software, PTLE will only recognize one interface. Best bet to add more analog I/O is through the ADAT Lightpipe I/O.

    8)
     
  3. hafsteinn

    hafsteinn Guest

    do you mean that protools only recognized the control 24 as one input?
    or that i would have to get additional protools hw?

    i would like to get the d-command but thats way out of the question of course considering its just a big remote, thel 24 has some nice preamps and a analog submixer which i found really enticing..
     
  4. gdoubleyou

    gdoubleyou Well-Known Member

    If you are using PTLE it can only access one digidesign interface at a time.

    The max I/O for the 002 are eight analog, eight digital via lightpipe(ADAT), SPDIF (digital stereo) for a total of 18. That's it to get more inputs you would have to step up to the industry standard PT|HD sytems, not to be confused with Pro Tools Limited Edition.(PTLE)

    8)
     
  5. hafsteinn

    hafsteinn Guest

    I was thinking of getting control 24, and the HD 3 system so i could optimize all the inputs. What do you think?


    what would you reccomend?
     

Share This Page