1. Register NOW and become part of this fantastic knowledge base forum! This message will go away once you have registered.

cpu fan noise

Discussion in 'Recording' started by Deusx, Oct 5, 2005.

  1. Deusx

    Deusx Active Member

    Feb 21, 2005
    hi every one, i have built a computer system for my recording work
    i haven't recorded through this because im waiting for my audio interface emu 1820m.

    intel original motherboard=915 Express
    processor = p4 lga775 3ghz ht

    the problem is the processor fan makes a lot of noise , it gradually increases from startup. and sounds like an aeroplane.
    is this going to be a problem for recording, what is the solution.
    cpu accessories are not available in the market. but if i require a fan of good quality tell me where to buy.thanks
  2. arbiter

    arbiter Guest

    You'll need a replacement cpu cooler that is designed to be quiet.
    Typically they'll use more copper than aluminum. The Intel cooler is mostly aluminium with a very small copper base.

    The P4 reference cooler is usually a 4pin cooler that can have it's speed regulated by the motherboard as temperature increases.

    Most of your aftermarket coolers will be a 3 pin "constant on" design that comes with some sort of adjustment control.

    I'd look into something from Zalman...maybe Coolermaster.
    Check how the kit installs, because some of the aftermarket stuff weighs so much that you may have to remove your motherboard and put a mounting bracket behind the board. That would probably be a lot of extra work for you...so you may want a kit that can use the existing Intel mount instead.
  3. Cucco

    Cucco Distinguished Member

    Mar 8, 2004
    Fredericksburg, VA
    Check out:


    Not only do these guys carry great and affordable stuff, they know what they're doing and talking about. If they don't have what you need, chances are, they'll build it for you!

  4. CoyoteTrax

    CoyoteTrax Well-Known Member

    May 25, 2005
    Home Page:
  5. CoyoteTrax

    CoyoteTrax Well-Known Member

    May 25, 2005
    Home Page:
  6. Deusx

    Deusx Active Member

    Feb 21, 2005
    i've checkd out both sites and i think of going for the Zalman cnps9500 led, however it is a bit costly as compared to other cpu coolers.
    on the compatibility page for the mboards for this cpu cooler there are a few warnings.


    There should be no interfering components within 56mm above or below the center of the CPU.
    2. There should be no interfering components within 45mm to the left or right from the center of the CPU.
    3. The Case must provide a minimum distance of 135mm between the Motherboard and the Chassis Cover.
    4. In Cases that come with Air Guides, the Air Guide Duct should be removed before operation.

    my mboard is d915Gav and required gap to fix this cooler on it is given 4.omm.
    how should i check the distances on my board
  7. jahme

    jahme Guest

    The Silent PC® web site investigates the acoustic aspect of information technology (IT) ergonomics, and a new growing market for acoustic comfort. Its most important conclusions:

    # It is becoming widely accepted that IT noise emissions often adversely affect users' well-being, and can make it harder to concentrate. By interfering with the human brain's information processing system, unwanted sound actually counteracts the very purpose of information technology. Building quiet PCs and other kinds of IT equipment is quite easy, but costs a little extra.

    # For a product group where there are no other means to compare acoustic aspects before buying, a growing number of hardware reviewers focusing on noiseless computing, and an increased use of the ISO 9296 IT noise declaration standard, now help interested manufacturers and buyers to meet. A simple to use universal product noise declaration and labeling standard that also includes sound quality metrics awaits its invention.

    The target audience of the site comprises purchasers and purchasing managers prepared to pay for sound quality engineering and low levels of unwanted sound - and industry decision-makers.

    updatedThe Silent PC®

    Note that The Silent PC Sweden based web site by no means is affiliated with Yamaha® Corporation, which owns the rights to use of the word silent for some other international trademark classes in the European Union, and possible also other countries.

    More on this subject can be read at the Site Info page.

    Yamaha is a registered trademark of Yamaha Corporation.

    There is a Market for Silence

    We have recent years seen an enormous increase of interest in noiseless computers, and other kinds of low-noise information technology equipment. Where there used to be very little to find when searching the Internet for these subjects, can we at this point find hundreds of thousands of references. Most computer magazines and web based IT hardware reviewers now write on the unwanted sound issue. Levels of noise emissions are these days mostly included as an important parameter in IT hardware reviews.

    Noiseless information technology has recent years also become business. Not only many new system units, data projectors and printers are built and marketed as quiet, but a new market for silent and quiet computer parts has evolved. Many users are annoyed by their noisy machines, and seek solutions for to make them comfortable.

    The Zalman Reserator 1 fanless PC cooling system

    The Reserator 1 is an example from a new and growing market for quiet and silent products. Courtesy and © Zalman Tech Co., LTD.

    Speech Intelligibility & Acoustic Comfort are Trends

    Speech intelligibility and acoustic comfort are quietly - still rarely commented as a phenomenon per se by the World's business press - becomming substantial product and service differentiators: The IT, automotive, air-conditioning, heavy equipment, building, hotel, home appliance, high-speed train and aircraft industries are just a few examples of business fields that nowadays invest a lot money to achieve low levels of unintentional sound, in sound quality engineering, and optimal conditions for speech communication.

    There is, however, something that still limits the use of these rather new differentiators and their opportunity for business, not only for IT equipment, but for most product groups and services where it isn't possible to base a choice on their acoustic aspects before buying: The relative notions "quiet", "almost silent" and "high acoustic specification" now inreasingly common used in advertisements, have by most manufacturers and sellers not yet been paired with comparable figures on which to make buying decisions, and most purchasers haven't been informed on how to use these now rare values. For the present acoustic comfort and speech intelligibility therefore remains an exlusive market where only the most technically interested reading reviews and a few well-informed purchasing managers knowing what standards to ask for, will find out what products and services are worth buying.

    This first page provides an background and introduction to the IT noise issue, the new market for noiseless IT equipment - and its current limitations. Lastly it tells some of what powerful manufacturers like Intel®, Microsoft®, Dell®, Hewlett-Packard®, Apple®, IBM®, Fujitsu Siemens Computers®, AMD®, VIA™, SAMSUNG and some other important companies and governments say and do about unwanted sound.

    The Industrial Society Matures

    Even if not as often as in the 1990s, we still say that the industrialized part of the World now is in the era of the information society or knowledge society; also named the information age. Living and working in this era, superimposed on the industrial society era, we believe that information, knowledge and communication are in focus. The most prominent symbol for the information society era is our information technology. Like most of our machines does our information technology equipment still often unintentionally produce sound: Such sound has almost always constituted a side-effect of our wealth-creating technology, and such sound has been a prominent feature of the industrial society era.

    On a psychological level has Man's relation to this unintentional side-effect since ancient time been dualistic: It can still either be regarded as something wanted, or unwanted. When wanted is the word we use for it sound, when unwanted do we name it noise. When thinking on sound as a positive side-effect of technology is it most often psychologically associated with power and masculinity, or wealth and security. Man's dualistic relation to machine and equipment sound, explains why both the acoustic aspects of ergonomics and comfort often have been neglected. In the information age this is about to change.

    Today we not only know that high-intensity noise emissions can be dangerous to our hearing organ, but also that even low-intensity noise emissions often adversely affect our well-being, can degrade speech intelligibility, and may have adverse effects on both human performance and health. We are now also in possession of technology to measure unwanted sound, and knowledge on how to objectify and minimize it.

    From Rock-Carving to Information Technology

    This rock-carving from Tanum, in the south of Sweden, was probably created about 3000 years ago: 2000 years before Norse Vikings landed North America. Experts have discussed what it shows. Some say it is a portrait of the god Thor; the most powerful of the Norse myth gods, and also known as the god of thunder, riding around middle-earth in his wagon drawn by two goats.
    Rock-carving from south of Sweden
    Others say that the man in a wagon may be a predecessor to Thor, like the Celtic god Taranis: The name Taranis derives from the Celtic (or Indo-European) root 'taran' meaning thunderer or thunder.

    In conclusion, it isn't possible to be sure on what this historical work of art on a flat rock shows, but it has been associated with a god capable of causing mighty sounds.

    The rock-carving in Sweden can, however, also be used for to compare from where we came to today's information society era: Rock-carving was an early kind of communication, and the stone and flat rock used for the carving can be seen as a primitive kind of information technology equipment. Rock-carving did for sure cause sound: It has been said that this side-effect even could have been part of a magic ritual. Today's information technology equipment still often as a side-effect cause sound, but few would say that there is anything magic involved.

    Vitlycke World Heritage Museum is where you can see the rock-carving. Image courtesy of Bokförlaget Signum.

    updatedAcoustic Comfort is not Absence of Sound

    Possible adverse effects of continuous low-intensity sound, like the one that may emanate from PCs and other technology intended for use in offices and homes, are all based on the fact that audible sound consciously or unconsciously calls for and competes for attention, and that monotonous sound decrease alertness.

    Alertness is a basic prerequisite for full attention. Attention, in turn, is what is utilized in information apprehension and information processing; thus a component of human brain function of utmost importance when utilizing information technology: Unwanted monotonous sound emissions (acoustic noise) both decrease the human brain's signal-to-noise ratio and alertness, and are therefore basically a counteraction to the very purpose of information technology. By interfering with the human brain's information processing system, acoustic noise emissions counteract the very purpose of information technology.

    The power of silence lies in that it provides a neutral background towards which sounds of interest can be heard, and frees brain-energy for treatment of other kinds of information than acoustic. Total and continuous silence is of course as boring and sensory depriving as too much unwanted sound.

    The Human Brain's Limitations

    Like our computers can the human brain only process a limited amount of information per time unit: In Psychology and Neuroscience this construct is known as "working memory". Because of the human brain's limitations is it important to provide it with as valuable as possible information; when we want to use it as constructively as possible.

    For to utilize it as efficiently as possible is it also important that the human brain doesn't have to work too monotonously, or stand too much monotonous information, and that it like the rest of our body is allowed to rest thoroughfully at regular intervals.

    Unintentional IT equipment sound can in some way be regarded as information, but commonly we don't need this information: Commonly we don't need to continuously be informed that a piece of IT equipment is on, and how this sounds.

    Projectors for Perfect Communication

    Personal computers are not the only kind of information technology equipment often emitting too much unwanted sound. Printers, copiers and fax machines are other examples, and nowhere else is the counteraction between noise and information technology more obvious as when high educated listeners to high educated speakers sometimes still have to face the, for members of an information society, degrading experience of having to try to focus on what the speaker says through the humming noise of an underdesigned projector.

    Projectors, as well as all other kinds of IT equipment, can also be declared using the intelligent international standard for unwanted sound the information technology industry agreed upon in the 1980s [1].

    Super Fast Silent Technology

    When writing on the ergonomic benefits of quiet machines is it inevitable to also acknowledge speed as a most valuable aspect of IT ergonomics. In fact, speed and performance constitute the sole reasons why computers at all were invented: We wanted computers to help us doing things faster than we were able to by our own brains and hands. Slow IT equipment can cause as much distraction as noise emissions. Therefore, the faster our machines are made the better will also one of their ergonomic aspects become.

    Man's imperfection, however, doesn't make it too easy to build high-performance and yet low-noise information technology equipment, but the fact that we face difficulties when trying to combine optimized acoustic and performance aspects of IT ergonomics, doesn't mean it isn't possible.

    If the computer industry can agree on a coordinated approach to the power management and thermal issues of the now maturing information age technology, will it also become easier to improve its acoustic aspects; while maintaining the need for increased speed, performance and reliability. This subject is further discussed at the Intelligent PCs page.

    Ergonomics, also known as Human Factors, is the application of scientific information concerning humans to the design of objects, systems and environments for human use.

    The Ergonomics of Sound

    Gripen aircrafts

    An optimized sound environment is part of the carefully designed Gripen aircraft man-machine interface.

    Ergonomics originated during the Second World War to overcome performance failures due to human error in new high tech defence systems.
    Gripen pilot
    Optimized ergonomics of sound are nowhere more important than in the aviation and defence fields of action: Here low levels of noise emissions, perfect speech intelligibility and relevant well-balanced sound-signals are a matter of safety; and in fact of life or death.

    All humans, including those high-performing ones selected for aviation and defence tasks, are limited in how much information they can handle: Low tolerances for errors explain why most of the research in the ergonomics of sound is focused on maximizing man-machine interfaces in aviation and defence systems.

    The way our psychology works lets us associate a sound emitting object's sound with its power, and to in turn link this information with the person that controls it. Human psychology also often lets us confuse acoustic exterior with acoustic interior. For more on these subjects, you can go to the Ergonomics page.

    Images courtesy and © Gripen International®

    Acoustic Competence is a Limited Resource

    In the information age peoples' concentration, but also optimal conditions for hearing and comprehension are of main importance. Acoustic engineers represent a group of professionals involved in improving these basic requirements for this new era: For to optimize sound perception and speech intelligibility they not only work to minimize background noise, but also strive to achieve optimal reverberation times in rooms, and design product sounds so that they best suit humans and their intended contexts.

    Acoustic science can be said to deal with how to aid humans in sorting out valuable acoustic information from less valuable, and sorting out unimportant sounds from more valuable kinds of information. Acoustic science thus is one of the sciences providing the fundament for the information society.

    An until recently rather low demand for acoustic services, has led to that now only the most mature industrialized nations are in possession of qualifying acoustic facilities and expertise.

    Freedom in the World of Sound

    Sound is an often neglected aspect of freedom: What do we want to listen to? What sounds do we want to expose our ears and brains to?

    Continuous exposure to unwanted machine and equipment sound has for a long time been left to experts to decide about: These experts have helped to find out what is an acceptable level of high-intensity acoustic noise emissions so as not to damage the organ of hearing, but they have also been trying to figure out what levels might be acceptable for low-intensity acoustic noise emissions, like the ones from machines and equipment intended for use in offices and homes.

    The Silent PC Web site promotes an approach regarding low-intensity acoustic noise emissions probably better suited a modern society and the special properties of this kind of emissions: Purchasers' freedom of choice, and manufacturers' freedom of competition.

    Purchasers' Freedom of choice

    Freedom of choice requires that there are alternatives, and that there are means to compare: There are no "listening rooms" for information technology equipment, like for HiFi equipment, and IT purchasers can't like car purchasers take products for a "test-drive" before buying. There are now two alternatives for those interested in identifying low-noise IT products:

    # IT hardware reviews including focus on products' acoustic aspects. This is already the fact. Check the WWW page for links. Most IT magazines now also include products' noise emissions in their hardware reviews.

    # Standardized comparable verifiable noise figures voluntarily provided customers by IT manufacturers interested in competing in acoustic comfort. The Silent PC Web site put its main focus on this alternative, because it is the one which easily can be included as a parameter in global trade: Thus not only reaching the most technically interested reading reviews, but all IT purchasers.

    The latter alternative is also the one that some of the World's most important IT manufacturers - Intel®, Microsoft® and Hewlett-Packard® - used to talk about or promote in the late 1990s. They are cited below.

    Facilitation of Global Trade in Acoustic Comfort

    Today's purchasing departments and private persons buying PCs, printers, projectors and other kinds of information technology equipment, will still only on rare occasions be provided the objective information they need for to make buying decisions according to level of noise emissions. If at all, will still most buyers find themselves facing subjective statements like "our PC is almost noiseless", "our printers are as quiet as a whisper", "our projector is quieter than others", "our graphic card is most silent in the business", or "we have been able to bring down the noise level 50% compared to an ordinary hard disk".

    These subjective statements based on relative notions are of course of little value if not paired with objective figures obtained in a standardized way.

    The few manufacturers that use exact figures to declare their products' noise emissions, except of the powerful ones now adhering to international standardization, most often either forget to obtain and declare them according to their international standards, or forget to state that they are using these standards: Thus the rare use of decibel - dB, dB (A) or dBA - figures, with few exceptions, still misleads customers to believe they are able to compare products' noise emissions, but dB, dB (A) and dBA don't mean anything if it isn't stated according to which standards their values have been obtained. What make things even worse is that for to be easiest to compare should IT noise emissions preferably be stated as declared A-weighted sound power level (LWAd) in bels (B) and not as sound pressure level in decibels (dB) [1,2,3,4,5,6] - something almost no manufacturers did until recently, at least not to end customers.

    For the IT equipment product group, where purchasers have had no other means to compare acoustic aspects before buying, global trade is now in the beginning of being facilitated: This since many hardware reviewers have started focusing also on products' acoustic aspects, and some interested manufacturers have started adopting the ISO 9296 standard [1] and labeling their sound power level values for customers.

    ISO 9296 is the standard to use for IT noise emission declaration. It includes the use of ISO 7779 for IT noise measurement. There are no competing standards to these two [7] - invented by the computer industry in the 1980s.

    The Unknown Value of LWAd & B

    Many people reading this have probably newer heard of the international standard ISO 9296, sound power level, LWAd or B (bel).

    Most ordinary people simply think of decibel (dB) when they think on noise figures and, as said above, if at all are ordinary people not knowing of a better alternative, used to face IT noise emissions being "declared" in decibel, expressing sound pressure level, and that according to no standard. But the serious ones in the IT industry think in declared A-weighted sound power level in bels per ISO 9296. So there is at this point a discrepancy between how ordinary people and the serious part of industry think on noise level measures, and there is no doubt that the latter know best.

    Anyone can obtain simple sound pressure level figures using a cheap sound pressure level meter, but it now costs manufacturers about $600 - 1200 to measure (ISO 7779) and have a product declared according to ISO 9296 in a qualified acoustic laboratory. This is probably the main reason why at this point most purchasers, OEM manufacturers included, don't know anything or know too little about sound power level measures, and why they are used to only face misleading non-standardized non-comparable non-verifiable sound pressure level figures.

    Today's high price for ISO 9296 declaration depends on its rare utilization, which results in low competition between acoustic facilities.

    Manufacturers' Freedom of Competition

    Freedom of competition requires that there is something to compete for: A low level of something unwanted is of course an aspect of product quality that complies with this basic prerequisite.

    The sustainable solution for freedom of competition on maximizing the acoustic aspect of IT ergonomics is, like for purchasers' freedom of choice, that interested manufacturers adopt the ISO 9296 noise declaration standard. Building quiet IT costs a little extra, as do adoption of the ISO 9296 standard. Since most buyers today aren't used to asking for standardized noise emission declarations for any products at all, information technology equipment included, their now increasing awareness will provide the breaking-point when it becomes even more profitable to build quiet products.

    However, at present it's not obvious that industry, here not only speaking on the IT industry, takes an interest in freedom of competition to minimize unwanted sound emissions from its products: This assumption is based on the fact that manufacturers themselves easily could be the ones to inform their customers on the value of their use of international noise declaration standards, but until now most commonly ignore to. The work towards a voluntary universal easy to use product noise declaration standard that takes sound quality aspects in account also show very slow progress: Invented already in the 1930s, the A-weighting filter still represents the only commonly used little effort to adjust dB and B figures to how humans in common apprehend different sounds. Sound quality metrics are only rudimentary covered with A-weighting.

    The World industry does have the power to change this state of things, in order to reform the acoustic comfort market place.

    Zalman TNN500A - an exclusive computer case utilizing sophisticated totally silent cooling solutions

    TNN500A - An exclusive computer case utilizing sophisticated totally silent cooling solutions. Courtesy and © Zalman Tech Co., LTD.

    Contraproductive Government Regulations

    Many of the World's governments express a deep concern regarding noise issues. In the industrialized part of the World have government concerns often resulted in regulations for levels of unwanted sound.

    Probably have government regulations here sometimes been contraproductive: Noise has tended to be seen as a government problem, instead of a market for acoustic comfort: An approach for natural reasons disliked by industry. It also seems like governments often have lacked the acoustic competence necessary for sustainable decisions in this field. So can it be, that we still haven't invented a universal easy to use and still accurate language to speak of unintentional technology sound.

    In the mean time can we use the best we have: The IT industry has reasons to be very proud for having invented the World's most ingenious noise declaration standard specifically for its product group: ISO 9296 not only prioritizes accuracy over good-looking figures, but also intelligently separates the less important sound pressure level figures from the more valuable sound power level ones.

    Where IT Manufacturers & Purchasers Meet

    ISO 9296 [1] values are not too difficult for customers to understand. Everyone that is capable of buying and using a PC will also, when properly informed, be capable of making buying decisions according to today's ISO standardized declaration of IT noise emission data:

    Product: (The name of the product)
    Declared noise emissions in accordance with ISO 9296:





    x.x B

    x.x B

    x.x B

    The lowest possible values of x are what is desirable if searching for a quiet product; Idling values are the most important to keep low. Other modes than Operating and Idling, which traditionally have been used, can be added. The Sleep mode has here been added, because the quite easy achieved goal total silence in Sleep mode encourages IT manufacturers to produce more comfortable and yet less power demanding products. See also US President George W. Bush's Executive Order 13221.

    B stands for bels and does here express declared A-weighted sound power level. One bel equals ten decibels (1 B = 10 dB), but bel is according to ISO 9296 preferred when talking on sound power level values for information technology equipment: This because it makes it easier to separate sound power level values from sound pressure level figures. A difference of 0.2 B is clearly noticeable. Lowering the sound power level by 0.9-1.1 B units means a 50 percent reduction of an object's "noisiness". Note that, due to mathematics, a silent object has to be declared as "silent", "inaudible" or - ∞ B, ie "minus infinity bel". A 0 B or 0 dB product is not a silent product.

    ISO 9296 also states how to declare sound pressure level figures, but since they aren't well suited for comparison of noise emissions between products [1,2,3,4,5,6,8] and therefore tend to add confusion, are they here intentionally left out. You can read more in detail on IT noise declaration, and learn how to use sound power level in bels, at the ISO 9296 page.

    Tranquil PC - quiet and declared according to ISO 9296

    The Tranquil PC - ISO 9296 declared - which makes it possible to compare and verify its low level of noise emissions.

    Noise Limits or/and 1-1SDoC?

    On the contrary to the thoughts at the Silent PC Web site are most of today's ecological, ergonomical, environmental and industrial quality logo labeling schemes setting noise limits for information technology, but not asking manufacturers to provide their customers their actual emission data. All these labeling schemes, which include noise as a parameter, use the ISO 9296 standard for noise emission declaration; so it would be most easy to also ask manufacturers to provide these values directly to customers, and let them decide what is an acceptable level of unwanted sound emissions. Setting noise limits doesn't counteract the possibility to declare noise emissions.

    Labeling schemes trying to regulate noise emission levels of information technology have until now for some reason mostly resulted in lack of industry adoption. Their noise limits have also no relation to the fact that information technology equipment fast has become part of quieter areas than some sort of average acoustic environments. Lastly does the ISO 9296 standard, but not these labeling schemes, comply with the also by the IT industry heavily promoted "One Standard - One Test, Supplier's Declaration of Conformity" (1-1SDoC or 11SDoC) concept [9]; something all involved participants - governments, manufacturers, resellers and their customers - benefits of.

    In 2001 Intel®, one of the World's most important IT manufacturers, stated that a declared A-weighted sound power level in Idling according to ISO 9296 of 4.0 B represents "a good trade off between acoustics, performance and cost." [6]. Interestingly enough, all today's IT ergonomics and environment labeling schemes still allow higher noise levels than Intel's target value.

    A little more on IT noise limits and 1-1SDoC can be read at the ISO 9296 page.

    The Economy of Overdesign & Underdesign

    The special properties of low-intensity acoustic noise emissions implies the possibility of either to overdesign or to underdesign products for their intended contexts. Overdesigned too quiet products cost unnecessary money, while underdesigned too noisy products cost human brain energy.

    Special properties of low-intensity acoustic noise emissions:

    # Noise emissions can only exercise any adverse affects if the exposed human possesses sense of hearing.

    # Low-intensity noise emissions can only exercise any adverse affects if the exposed human, consciously or unconsciously, apprehend them as distracting.

    # What is regarded as acceptable sounds by some people is regarded as distracting noise emissions among others.

    # What is regarded an acceptable level of noise emissions by some people is regarded a too high level among others.

    # Noise emissions from machines and equipment will not be perceived if they are lower than the ambient background.

    The special properties of low-intensity acoustic noise emissions constitute the main reason why it is better to declare them to purchasers than to try to set general limits for when they might be acceptable. Noise declaration minimizes the risk of both overdesign and underdesign.

    Thoughts on Unwanted Sound

    Below follow examples of what some important companies, ergonomic labeling schemes and governments think and do about noise emissions.

    Some of the sources are commented because of their ambiguousness or their lack of conformance with international standardization - This because it confuses purchasers and therefore counteracts purchaser awareness; which in turn counteracts freedom of competition regarding the possibility to improve the acoustic aspect of IT ergonomics. The examples below, however, all represent thoughts by some ones who at least have acknowledged unwanted sound an issue.

    Note that The Silent PC is an independent publication and has not been authorized, sponsored, or otherwise approved by any of the companies or other sources at the site mentioned or cited.


    Dell is one of the World's most important computer systems and information technology companies; well-known for its concept to sell computer systems directly to end-customers. Among the initiated Dell is also known for some clever designed low-noise computers. That Dell is a conscious manufacturer shows in that it is one of the first IT companies presenting industry standard noise declarations according to ISO 9296 for all products easy accessible for customers.

    "Dell voluntarily declares its product performance of environmental aspects for Dell products through Dell Environmental Data Sheets. Environmental performance data includes information on product energy consumption, acoustics emissions, materials, eco-labels and approvals, upgradeability/extendibility, and end-of-life management."

    Here are all Dell Environmental Data Sheets.
    Dell's head measures sound quality aspects.

    When Dell writes on product testing it states:

    "In order to meet eco-label requirements and customer expectations, Dell systems are tested for energy consumption, acoustics, and visual ergonomics in Dell's internationally certified state-of-the-art acoustics test facility, located in Austin, Texas. The acoustics facility is an accredited acoustic test facility under the National Voluntary Laboratory Accreditation Program (NVLAP) administered by the National Institute of Standards and Technology and conducts testing according to widely respected ISO test guidelines."

    The image shows measurement of sound quality aspects at Dell's NVLAP accredited laboratory. There are two more images from this facility at the ISO 9296 page.
    Courtesy and © Dell Computer Corporation.

    Comment: Dell not only declares according to ISO 9296, but also strives to optimize sound quality aspects of its products; important aspects which are not yet covered by this standard. Dell also deserves an extra compliment for leaving out customer-confusing talking about noise measurement standards in its data sheets, thus for the moment being one of a few IT manufacturers showing total conformance with the requirements of ISO 9296.

    Dell and the Dell logo are trademarks or registered trademarks of Dell Computer Corporation.


    IBM, International Business Machines Corporation, is the world's largest information technology company. Here IBM writes on noise and healthy computing:

    "..Noise can be very distracting and prevent concentrated mental work. In extreme cases, it can also result in physical disorders."

    "..As workstations continue to migrate from the computer room to the quiet office, acoustical noise becomes an increasingly important concern to both users and designers alike. Acoustical noise is considered a human factor because it affects such factors as a workers comfort, job satisfaction and performance. Noise has several adverse effects on human beings. On the physiological side, these effects include hearing damage and hearing loss. On the psychological side, they include interference with speech communication, impairment of performance, and annoyance."

    Web-Based Product Noise Declarations is a recent and most impressing article written by IBM acoustic specialists. It covers a proposed program for making standardized noise declarations for both industrial and consumer products. The proposal is aimed at the information technology industry in particular but is generally applicable to all industry groups.

    What is an Acoustical Noise Declaration? - a document where IBM explains the benefits of standardized noise declarations.

    Comment: It is hoped that all of IBM will choose to conform with its skilled acoustic specialists' valuable proposal. In December 2004 China's Lenovo Group signed a definitive agreement to acquire IBM's personal computing division. For the present there is no available information on the Lenovo Group's attitude to the IT noise issue.

    IBM is a registered trademark of International Business Machines Corporation in the United States and other countries.


    Hewlett-Packard Logo - used courtesy of HP Sweden.

    Hewlett-Packard (HP), incorporated in 1939, may 2002 merged with Compaq Computer Corporation®. The combined new HP company now constitutes the World's biggest maker of computers and printers. As early as in 1997 did Hewlett-Packard make this impressive statement on IT acoustics:

    "To allow reliable noise comparisons between different PCs, Hewlett-Packard hopes other manufacturers will also start to publish acoustic power values according to ISO 7779."

    The Hewlett-Packard noise statement can be found in a most instructive white paper named "hp PCs and acoustic noise". Here they also write:

    "Noise pollution is a growing problem in our society today. In everyday life we have to tolerate high levels of noise, such as that of traffic, factory workplaces, and busy shopping centers. To concentrate, however, we need a quiet work environment. Personal computers in the office do create noise and can be distracting."

    Comment: HP declares some of its products according to ISO 9296. These data can be found below the heading Product Environmental Profiles. Note that much of this information is rather old: You get the impression that HP doesn't keep all its noise declarations uptodate. Also note that ISO 7779 is a measurement standard intended for acoustic specialists, not for IT equipment purchasers. It is, however, frequently confused with ISO 9296, which is the noise declaration standard; ie the interface where manufacturers and their customers can meet. ISO 9296 only states to report according to itself.

    HP, Hewlett-Packard, Compaq and the HP Invent logo are registered trademarks or trademarks of Hewlett-Packard Company.


    Intel is one of the World's most important companies in PC hardware manufacturing and specifications. Intel has a long tradition in working for improved PC acoustics. An example is where Intel write on Active Hardware Monitoring and Control for Quieter Desktop PCs. Here this important manufacturer states:

    "Domestic, international, and industry standards are all demanding better PC acoustics."

    An other example on Intel's longlasting efforts in the direction for quieter PCs is found in the the PC 99 System Design Guide:

    "Intel and Microsoft are working on proposals for acoustic noise measurement and reporting procedures for PCs. The goal is to achieve common PC acoustic noise measurement methods based on established international standards. With such methods in place, end users will be able to receive reliable acoustic noise specifications about PCs similar to those available for other product categories such as automobiles and appliances.

    Although this requirement does not specify noise limits PCs in idle and working states, manufacturers are encouraged to design systems that operate as quietly as possible, especially PCs designed for use in the home family room."

    Acoustic Overview is a valuable document at Intel's Desktop Form Factors site:

    "As the performance of PC's increase and move from under the desk to other environments, acoustics are quickly becoming a critical part of system design. This document provides background on the science of acoustics, the key areas of the system for concentration, as well as an example design process."

    Intel is a registered trademark of Intel Corporation in the United States and other countries.


    Microsoft is the World's most important software manufacturer, well-known for its successful Windows® family of operating systems. Microsoft also manufactures some pieces of IT hardware, like mice and keyboards, and recently also a game-playing console, the Xbox®. From about 1998 to 2001 did Microsoft at this url say:

    "..Microsoft believes it is critical to achieve quieter operation in PCs.." "..It is expected that the summary "declared acoustic noise emission values" will be made available by manufacturers to consumers in a standardized form. No time frame has yet been established for noise limits as part of the "Designed for Microsoft Windows" logo program, but this is still being examined by Microsoft as a long-term objective.."

    In the early months of 2002, but possible as early as in 2001, to about May 2002 did Microsoft at this url talk on "Designing a consumer desktop PC optimized for Microsoft Windows XP" and they made this statement:

    "Best Practice: System meets PC Design Checklist guidelines for quiet operation
    The PC should be as quiet as possible so that it is welcome in the kitchen, bedroom, and living room, based on the following guidelines:

    # The target for the declared sound power level of the PC should be 37 dBA in the sleep state and idle mode, but no more than 50 dBA. The target level should be less than 55 dBA in active modes. The sound power level must be measured according to ISO 7779 and reported according to ISO 9296.

    # To encourage the user to leave the PC on, it is important to completely turn off all fans when the PC is in the S3 or S4 state. This implies that all subsystems are designed to be self-cooled in the suspended state. The system’s sound power level and sound pressure level in idle and active modes should be published to help customers select a PC designed for quiet operation."

    May 2003 Microsoft talk about "Athens"; a conceptual product in cooperation with Hewlett-Packard®:

    "The negative effects of high acoustic emissions from PCs not only interfere with audio quality, they also can affect user productivity and even create potential health risks."

    "The "Athens" PC design goal for acoustic emissions is 30 dB or less in A-weighted sound pressure (as defined in ISO 7779 and ISO 9296) while all components except the optical drive are operating."

    updatedComment: In the "Best practice-statement" Microsoft didn't conform with ISO 9296: According to this standard dBA is not what should be used when stating sound power level measures for to compare IT equipment with IT equipment. In the "Athens-statement" Microsoft set a noise level goal in sound pressure level figures. This is not wrong, but a pity, since sound power level is industry standard while sound pressure level isn't. Sound pressure level figures according to ISO 9296 cost as much as the sound power level figures, but are less valuable for product comparisons.

    The Silent PC Web site author hopes that the successful Microsoft company will prioritize exact consistency with international standardization in its future unwanted sound writing: This for to aid in reducing the common confusion surrounding the subject. It would also be a most valuable extra bonus if Microsoft choosed to promote the market-driven alternative for to bring low-noise IT equipment to those interested in paying for it: Noise emission declaration according to ISO 9296 to end-customers can be included as a voluntary option in Microsoft's quality logo programs.

    Microsoft, Windows and XBox are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.


    Statskontoret, the Swedish agency for public management, provides support to the government and government offices. Its task is to conduct studies and evaluations at the request of the government, and also to modernize public administration with the use of IT. Standardization for IT procurements is one of this agency's important jobs:

    Statskontoret's Technical Standard 26:6 - Acoustical Noise Emission of Information Technology Equipment - TN 26:6 - is ever since it was created in 1984, and several times updated, the World's most important standard for acceptable upper noise limits for information technology equipment used in homes, offices and data processing centers. While all other ergonomic labeling schemes, and manufacturer quality logo schemes, assume that there exist some sort of average acoustic environment, does Statskontoret's Technical Standard 26:6 divide its recommendations in to three different categories, where the the Category III products are the ones intended to be used where low-noise working conditions are required.

    Statskontoret's Technical Standard 26:6 was last updated July 1, 2004. The main changes are that some new types of equipment have been added and that, "because of the technical development, it has been possible to lower many of the highest recommended values for Category II and III equipment." Noise declaration per ISO 9296 is of course also used in TN 26:6.


    AMD, Advanced Micro Devices, Inc, is the World's second most important PC processor (CPU) manufacturer.

    With the introduction of the Athlon 64 processor AMD in 2003 introduced a technology named "Cool’n’Quiet™". This technology slows the processor and its cooling fan down when the CPU demand is low. This way Cool’n’Quiet™ both can save electric power and reduce noise emissions. AMD regards low noise emissions part of a good working environment:

    "Cool‘n’Quiet™ technology to minimize heat and noise for a better working environment"

    Comment: The Athlon 64 processor series is the one most often recommended for building high performing quiet PCs. Symtomatically, for an industry that yet hasn't adopted a systemwide approach to the PC system unit's thermal, power consumption and acoustic challenges, have many motherboard manufacturers still not added support for AMD's Cool’n’Quiet technology. Here is a SilentPCReview list of the boards that now can take use of AMD's Cool’n’Quiet technology.

    AMD is a registered trademark and Cool’n’Quiet is a mark of Advanced Micro Devices, Inc.


    VIA Technologies, Inc. is an important innovator and developer of PC core logic chipsets, microprocessors, multi media and communications chips. In 2001 they launched a family of PC processors (CPUs), the VIA C3, that could perform well without the need of an active noise emitting cooling solution. The C3 processor family has since then been accompanied by the Eden and Antaur CPU families. VIA's new tiny Eden-n CPUs include some most advanced power management and security features, and runs at an extremely low power consumption: What about 1 GHz at 7 watts on a mainboard measuring only 12 x 12 centimeters?!

    The VIA EDEN platform logo

    This conscious manufacturer has also built a most impressive Web site on low-noise computers named "Quiet Computing From VIA":

    "Large, overpowered PCs require many high-speed fans to ventilate and cool them and the result is excessive PC noise. Much of the PC industry's scarce resources are being directed at silencing these fans and coolers as a treatment for PC noise. VIA's highly efficient processor platforms target the issue of PC noise at the source because they require minimal noisy forced air-cooling and can result in quieter overall PC systems especially when combined with smaller, quieter power supplies."

    VIA Technologies promotes adherence to international acoustic measurement and declaration standards. In their important white paper "Noise, Computing and VIA" published in May 2003 they state:

    "To create a level playing field for comparing products VIA recognizes that adherence to a standardized noise measurement system is imperative."

    VIA act as they talk: At the bottom of their VIA EPIA M Mainboard and VIA EPIA V Mainboard pages can we find the World's probably first manufacturer declaring mainboards according to the ISO 9296 standard.

    The VIA Nano-ITX form factor 12x12 cm mainboard runs a fanless EDEN-n CPU with advanced power saving and security features

    The VIA Nano-ITX 12x12 cm mainboard form factor.

    Here VIA writes on the home PC market segment:

    "Without doubt, the PC market as we know it is changing, and VIA has made no secret of its belief that connected digital media devices for the living space are the "Next Big Thing" for the PC, with perhaps more growth potential than any other existing segment of the market. The VIA philosophy is that Home Entertainment applications require a better experience rather than higher raw performance. Essentially this means just ramping up clock speed is not the answer for this segment of the market. What matters is optimizing performance where it counts, which for the living room is excellent audio and digital video quality, and offering it all in a low noise, low heat package that fits into a small attractive chassis."

    VIA, Anataur, Nano-ITX, Eden and the Eden platform logo are trademarks of VIA Technologies, inc.

    Analog Devices®
    Analog Devices - one of the first in the electronics industry targeting PC noise at system level

    Analog Devices, Inc. is a well-reputed company in the design, manufacture and marketing of high-performance analog, mixed-signal and digital signal processing integrated circuits used in signal processing applications. In February 2002 they released one of the World's first integrated circuits targeted at minimizing PC acoustic noise emissions at system level:

    "A "silent PC" movement has emerged, and PC OEM and motherboard manufacturers are beginning to respond to customer demand for quieter PCs, embedded controllers, high-availability servers, and network systems by producing a range of low-acoustics products. With the ADM1027, Analog Devices provides these manufacturers a complete thermal systems sensor that intelligently monitors and controls both thermal management and noise."

    In the article Differentiating PCs in a 'Toaster World' Intel® and Analog Devices provide some of the latest knowledge on how Man reacts to noise, rules out the important relation between heat and noise, and how PC noise can be minimized by letting Analog Devices' dBCOOL™ chip control fan rotation speed according to need. Here is an EE Times article on Analog Devices - "Analog IC vendors find 'Intel Inside' a safe bet"

    The Intelligent PCs page explains how Analog Devices' dBCOOL™ circuit and, other manufacturers' similar ones, at little expense in mass production integrated on a motherboard, can minimize PC acoustic noise emissions, improve thermal management and reduce electric power consumption. A particular benefit of Analog Devices' solution, which might not be the same for other chips, is that it takes psychoacoustic considerations in account.

    newNational Semiconductor®

    National Semiconductor is the inventor of the SensorPath™ Interface Technology, a new bus targetted at improving PC thermal awareness and control, with the goal to also minimize PC acoustic noise emissions:

    "Today’s PCs present an increasingly difficult challenge for thermal management and control. Continued increases in the clock speed of processors, memory, chip set and graphic chips have dramatically raised temperatures inside PCs and increased the demands of hardware monitoring and, at the same time, prices for PCs and components continue to fall. In addition, new requirements such as minimizing acoustical noise, simplifying board routing, and standardizing platform designs add to the complexity of designing a thermal management solution. The situation promises only to worsen with upcoming generations of PCs, as new high-speed buses like PCI Express™ and smaller form factors emerge."

    The National® SensorPath™ bus provides a solution to improved PC thermal and acoustic management.

    Developed as an open standard for all manufacturers the SensorPath™ bus can improve PC thermal and acoustic management.

    The Intelligent PCs page further explains this subject.

    National Semiconductor and National are registered trademarks and SensorPath is a trademark of National Semiconductor Corporation. PCI Express is a trademark of PCI-SIG®


    Apple is regarded one of the World's most inventive personal computer hardware manufacturers, and also well known for providing an operating system, MacOS®, and other software with an easy to use ergonomic human interface. Apple has manifested its thoughts on the importance of lowering noise emissions in products like the iMac®, and the now discontinued Power Mac® G4 Cube. Apple provides some reading on its products' environmental attributes and in them, below below the heading "Noise characteristics", you can read the following:

    "Acoustical noise is becoming an increasingly important concern to computer users. It affects user comfort and performance, and it may become disruptive and annoying to the user or others in the work environment. For these reasons, Apple is concerned and designs our products to generate acoustical noise levels as low as possible."

    Apple's Power Mac G5 machines were June 24, 2003 advertised like this:

    "The Power Mac G5 features a modern chassis constructed of anodized aluminum. Inside, an efficient cooling system uses low-speed fans for superquiet operation - twice as quiet as a Power Mac G4."

    And like this:

    "Fans in the zones spin at very low speeds resulting in a system three times quieter than the Power Mac G4."

    The Apple Power Mac G5 machines are from a technical/acoustical standpoint most interesting: They have been equipped with a hardware monitoring and controling "brain", which adjusts cooling in different thermal zones according to need. The Power Mac G5 computers also incorporate an automatic power management technique called bus slewing. Bus slewing is designed to run at high processor and bus speeds and high voltage when the demand on the processor is high, and to run at low processor and bus speeds and low voltage when the demand on the processor is low. Read more on this subject at the Intelligent PCs page.

    The Mac Mini is one of the most recent additions to Apple's computers (January 2005). Advertizing the Mac Mini Apple says: "Best of all, Mac mini purrs along at a whisper-quiet sound level, so there’s no reason to hide it under your desk like an old PC to save your ears."

    Comment: The Apple Power Mac G5 machines, are now noise declared according to ISO 9296, exactly conforming with the standard! Check here. It is hoped that this marks a new trend by Apple. The Apple claims regarding low noise emissions for the Mac Mini seems to be confirmed by independent reviews. G4Noise.com is a web site focusing on Macintosh noise issues.

    Mac, MacOS, iMac, Power Mac, Mac Mini and Apple are trademarks of Apple Computer, Inc., registered in the U.S. and other countries.

    updatedIT Eco Declaration

    IT Eco Declaration is a Swedish initiative, and alternative to ergonomic labeling schemes. This declaration standard complies with the 1-1SDoC concept; for many years promoted by the World's IT industry [9]. IT Eco Declaration is now widely used by IT manufacturers, resellers and their customers in the Nordic countries: "IT Eco Declaration helps purchasers and persons responsible for environmental issues to make a professional choice when buying IT and telecom products."

    Declaration of sound power level and sound pressure values in Operating and Idling modes per ISO 9296 is included in IT Eco Declaration.

    Comment: Declaration of sound emissions in Sleep mode ("ACPI S3" for PCs) will hopefully be included in a future update of IT Eco Declaration: This since encouraging low noise levels or silence in Sleep mode not only at little cost provide better acoustic environments, but most often also is more ecological, because it reduces consumption of power: Pitifully enough, as it seems, a limited resource at this planet. See also US President George W. Bush's Executive Order 13221.


    AOpen is an IT hardware company with a particular good reputation for their well-built PC motherboards. November 2002 AOpen proved that they also care about their customers concentration:

    "Have you ever had the experience of being bombarded by the enormous noises from your CPU fan while you were enjoying music CD? Or in the still of the night, when you were obsessed in surfing the internet, you wish that this whole fan buzzing thing could stop for just one second? With years of research, involving Electronic, Air Dynamic Thermal, Mechanical Engineering and BIOS, AOpen proudly introduces "SilentTek", the Silent PC Technology, on our new generation of AOpen motherboards."

    "..In addition to SilentTek, SilentBIOS technology is also being implemented on some of our motherboard. SilentBIOS controls noise level before OS boot, or during the Jukebox FM and Jukebox CD play time, but in the end will pass the controlling authority to SilentTek after OS boot."

    Spring 2005 Aopen introduced a new intelligent feature named "Power Master":

    "Power Master is a hardware controller to detect your CPU actual loading. And give your system the real time performance. When the loading is really low, it can lower the CPU current and make the fan slower to provide you the quietest working environment. On the contrary, Power Master will increase the CPU current and overclock in time to provide you the best performance."

    Here are the AOpen links: SilentTek, SilentBIOS and the press release. Here's a SilentPCReview of SilentTEK, and here of Power Master.

    Fujitsu Siemens Computers®
    Fujitsu Siemens Computers

    Fujitsu Siemens Computers is Europe's leading computer company. Below the heading Silence they tell:

    "Less noise brings more productivity at no extra cost Do you know the following situation? You work in a quiet room e.g. your office. When you switch off your PC, you suddenly notice how intrusive the background noise was. That is what happens to most people - you only perceive noise when it has stopped."

    At the bottom of that page Fujitsu Siemens state: "Fujitsu Siemens Computers - the whisper PCs." It is at the same location also possible to view a most interesting high-quality movie on the benefits of quiet working environments, and to download some valuable reading on PC noise emissions.

    Fujitsu Siemens patents related to optimized sound-ergonomy is the xcontrol™ for to reduce CD and DVD rotating speed, and their low-noise fan control reducing the PC operating noise:

    "During the last few years an almost unbelievable increase in the performance of PC has been achieved due to rapid developments in processors and other PC components. Highly complex calculations, which hitherto were reserved for Mainframes, can now be carried out in a matter of seconds on PC. Data can be exchanged online via the Internet, even over long distances.

    However, the operating noise of the components has been neglected. In many of todays' systems the hard disc, CD-ROM, power supply, processor fan etc... demonstrate noisily just how hard they are working, something which can prove to be more than tiresome during long periods of use, especially in the home."

    Comment: Fujitsu Siemens Computers doesn't yet make it easy for customers to compare its products' levels of noise emissions. This is a pity since its computers often receive good test results for low noise emissions. It is hoped that this important IT manufacturer, investing so much efforts in a comfortable quiet computing experience, soon will update its Web site and product technical specifications to also include the important ISO 9296 sound power level noise values.

    The Fujitsu Siemens Computers logo is a trademark of Fujitsu Siemens Computers GmbH.

    updatedTCO Development®

    TCO logos
    TCO Development is worldwide known for its TCO ergonomic and environmental labeling of computer screens, but TCO Development also sets quality standards for information technology like PC system units, peripherals and mobile phones. In the TCO'99 certification a low computer acoustic noise emission as a mandatory requirement was introduced. The reason:

    "Noise from fans, hard disks etc can be annoying. To prevent such annoyance, the aim is to have as little unintentional sound generation as possible from system units and personal computers where they are used."

    The TCO'99 certification states that system units' acoustic noise emissions shall not exceed LWAd 4.8 bels when idling and 5.5 bels when operating declared according to the ISO 9296 standard, but with the addition that the sound power measurements according to ISO 7779 only have to be performed in six microphone positions.

    Comment: Even if almost every PC hardware manufacturer of honor have adopted it for quality labeling of computer screens, have yet very, very few manufacturers chosen to adopt TCO'99 for labeling of system units. TCO Development is now carrying out deeper research regarding the acoustic aspect of PC ergonomics for the TCO200X computer quality and environmental standard. It is hoped that TCO Development in its updated certification will choose not to deviate from original international standards, making the standard compatible with the "One Standard - One Test, Supplier's Declaration of Conformity" (1-1SDoC) concept [9]. It is also hoped that the updated certification will ask manufacturers to provide customers their actual noise emission values: This since a target sound power level value, based on some sort of average acoustic environment, always will risk become too high for quiet environments.


    SAMSUNG's Hard Disk Drive Division is among the initiated known to produce some very quiet and yet high performing hard disks. In a white paper named Noise Gard™ this important manufacturer writes:

    "As HDDs have become more advanced, they have also become excessively noisy. Computer generated noise interferes with the consumers audio/video experience. Also, as many computers are located in bedrooms, the acoustic noise created while downloading at night may disturb a good night's sleep."

    SAMSUNG hard disk drive division invests in low-noise technology

    SAMSUNG invests in low-noise information technology. Courtesy and © SAMSUNG

    "In the SilentSeek™ Technology white paper SAMSUNG's HDD division informs:

    "In the past customers have chosen HDD products based on capacity, price and reliability. However, recently, as the application of HDD becomes more diversified, acoustic noise emission has emerged as one of the most important HDD characteristic."

    Comment: The Samsung SP1604N was recently choosen the reference quiet high performance 3.5" hard disk for the trusted source SilentPCReview. It is hoped the SAMSUNG group soon will decide to provide comparable and verifiable noise figures for all its most competitive IT products according to the international standard ISO 9296.


    Seagate is an important manufacturer of PC storage technology. From about 2001 to 2003 they had the reputation of being the provider of the World's quietest and yet high-performing hard disk series, the Barracuda ATA IV. Not only was this disk series very, very quiet, but the little sound it emitted was regarded pleasant:

    "Seagate has performed extensive research and development of both quieter drives and better system designs to minimize the perceived acoustics of drives and systems. Seagate is leading the industry in not only providing exceptionally quiet drives but also understanding how drives sound when they are in systems, and designing methods, models and products to minimize overall system noise. These efforts are resulting in ever-quieter disc drives from Seagate and better system designs by OEMs and integrators, which ultimately results in more satisfied customers and end-users."

    Comment: The above is cited from the instructive Seagate document Disc Drive Acoustics, where Seagate at this point seem to forget that the IT Industry has agreed upon to use bel and not decibel when stating sound power level measures, and don't mention the standard they conform to when declaring their products' noise emissions. However, if you check the specs for the Seagate Barracuda Serial ATA V series hard disks will you find sound power level being declared in bels. Seagate was recently known for providing the World's most quiet high-performance hard disk series. Now many users complain that the Barracuda 7200.7 disks aren't quiet enough, compared with the earlier Barracudas. These disks are, however, still regarded quieter than many other manufacturers'. It is hoped that Seagate soon will be able to provide a further improved harddisk series, and also that the company will choose to provide standardized possible-to-compare noise data according to ISO 9296, even if these values at first glance might look less elegant, and even if the rest of the storage industry, at least for some time, will continue to communicate non-comparable non-verifiable figures.


    SuSE is an important developer of the Linux® operating system. In an e-mail, here with permission cited, they state:

    "SuSE Linux is working in direct conjunction with all major hardware vendors on all new hardware developments. Of course we will also support any efforts to save energy or reduce noise in modern computer systems"

    SuSE and its logo are registered trademarks of SuSE AG. Linux is a registered trademark of Linus Torvalds.

    The United States of America

    The US Noise Control Act of 1972
    The US Noise Control Act of 1972:

    "The Congress declares that it is the policy of the United States to promote an environment for all Americans free from noise that jeopardizes their health or welfare. To that end, it is the purpose of this Act to establish a means for effective coordination of Federal research and activities in noise control, to authorize the establishment of Federal noise emission standards for products distributed in commerce, and to provide information to the public respecting the noise emission and noise reduction characteristics of such products."

    The Reagan administration closed the United States Environmental Protection Agency's (EPA) Office of Noise Abatement and Control in 1982. The U.S. Congress has not rescinded the Noise Control Act of 1972: It has been left intact but without authorization to carry out any new activities or funding for any old activities.

    updatedComment: A major part (about 34%) of the visitors to The Silent PC Web site come from the US. The US manifests its thoughts on freedom, freedom of choice and freedom of competition regarding products' acoustic aspects in that some of its most important IT manufacturers now provide comparable data according to ISO 9296 for their products. The most competitive US national standard body is also the nation's that has come the closest to a universal easy for purchasers to understand and still accurate noise marking standard (the "relative noisiness" metric discussed in proposals for the ANSI version of ISO 4871). A US citizen working at IBM® was the one behind the clever idea to identify IT sound power level values by the use of bel, for not to confuse them with sound pressure level figures stated in decibel. Some more on the US relation to unwanted sound is found at the Noise Labels page.

    updatedThe European Union

    The European Union flag
    The European Union has an active government policy on minimizing acoustic noise emissions: The European Commission views noise in the environment as one of the main, local environmental problems in Europe. Here is the European Commission's
  8. Mr-Nice

    Mr-Nice Guest

    If the mic set-up is in the same room as the PC then yes it can create a problem. I had a 120mm case fan that sounded like a jet too and I took it out, and the PC was still a bit loud. Turns out it was my CPU fan as well so I looked up for a quiet one bought it and installed it. My PC is at least 40% quieter and heat isnt so much an issue with removing my case fan. I have sort of a large case and plenty of vent holes for air to move through. I wouldnt recommend removing a case fan if your case is small especially if you have some additional devices in it like more HD's. I also recommend for you to get a good thermal grease for your CPU. I will eventually get a quiet case fan down the road becase even though I dont have problems I still feel its like having sex without a condom, not too smart. :)

    Does this help?
  9. McCheese

    McCheese Well-Known Member

    Mar 24, 2005
    Zalman makes some good cooling fans. The 7700Cu is friggin' huge, but at half speed it will cool a degree or two better than your stock fan, and will be near silent. I've got one on my gaming rig.

    Thermaltake also makes good stuff I hear, but I have little hands-on experience with them.

    Another big factor in fan noise isn't actually the fans themselves, but what they are pushing air through. My buddies case was very loud, and it seemed to be the back fan. It turned out it was that the ventilation holes were restricting the air flow, so he cut out the area with a dremel and installed a wire fan grill and presto, problem solved.
  10. Deusx

    Deusx Active Member

    Feb 21, 2005
    i am sure that the problem is with the processor fan and im gonna see which one suites my mother board and processor.
    the only thing i m afraid of is even if i get the processor fan+heatsink such as from zalman's they suggest a distance that the fan should be kept from other peripherals such as ram,vga.
    i've four ram slots and two 512mb modules so 2 are free.
    one vga pci express card, and a couple of pci slots would be occupied by the audio interface pci cards when i have them.
    how am i supposed to make adjustments for the fan so there is no hinderence for it. while keeping all other peripherals be fitted on the board as well. :-?
  11. Cucco

    Cucco Distinguished Member

    Mar 8, 2004
    Fredericksburg, VA
    Uhhh, okay jahme - that might go down in record as the longest post in history in one thread. It appears though that you copied and pasted much or all of the text - please, next time provide us a link.

    Often I read and respond to these messages on a PDA - it took me over six minutes to friggin scroll to the end of the message!!

  12. Mr-Nice

    Mr-Nice Guest

    ^^ I see a post that long and I just scroll right past it. Its either plagerized from another site or its mostly gibberish anyway (take your pick).

Share This Page