1. Register NOW and become part of this fantastic knowledge base forum! This message will go away once you have registered.

Crackling while in playback

Discussion in 'Recording' started by guitarpalyer225, Aug 27, 2005.

  1. I am new to recording, have encountered a puzzling problem.
    I am using Cool Edit Pro 2.0, and while in the program the .wav file plays as it should, but if i play the same file in another program (winamp) for example its all crackily. Did i just forget to filter somthing. I don't even know where to start looking.
    Any help would be appreaciated.

    Thanks
     
  2. sickyboy

    sickyboy Guest

    Maybe a different sample rate? I 've heard that one time and i think it was the sample rate.
     
  3. jahme

    jahme Guest

    yes...its the sample rate problem. either ur soundcard cannot support the rates or the configuration in the software went wrong. look at ur soundcard's maximum sample. if ur using a non-pro soundcard, then put ur sample rate in 44khz or 48khz. if u are using a pro soundcard, then use at 96khz.
     
  4. Dr_Willie_OBGYN

    Dr_Willie_OBGYN Active Member

    It could be a lot of things.

    Are you abel to monitor CPU usage? If you have lots of tracks then keep in mind that with programs like Nuendo you have to DISABLE tracks (not mute) otherwise those tracks are sucking up processing power. It's as if they were all playing.
     

Share This Page