1. Register NOW and become part of this fantastic knowledge base forum! This message will go away once you have registered.

cubase, trouble with mixdown and panning

Discussion in 'Cubase' started by gibbler, Oct 7, 2007.

  1. gibbler

    gibbler Guest

    Hi... I'm using Cubase LE, and I have about 8 tracks set up, and everything's in order the way I want it, regarding volumes and panning. However, I've tried to export to mixdown a few times, and I'm realizing that each time I do this, the panning isn't incorporated, and everything seems centered. What am I missing here? It's probably some simple solution, but I'm new to the program, so I figured I'd ask! Thanks!
  2. MediaMurder

    MediaMurder Guest

    Well I dont use cubase but Im sure the problem is that you need to set it to export in stereo instead of mono.
  3. JesterMasque

    JesterMasque Active Member

    Jul 18, 2006
    Itasca, Illinois
    Home Page:
    When you have the Export->Audio Mixdown window open, look at the "Channels" portion of the window. It should be either a pulldown menu or button select for MONO, STEREO, or STEREO INTERLEAVED <-with pulldown only.

    If you have the pulldown, use the interleaved. Otherwise, well, obvious.

    Also, be sure that when you export it is at 16-bit Resolution, given that you recorded at 16-bit. If you have recorded at higher than 16-bit, you need a dither plug-in. My advice, stick to 16-bit recording for right now. Also, be sure that the Sample Rate is selected at 44.1 before you click export.

Share This Page