1. Register NOW and become part of this fantastic knowledge base forum! This message will go away once you have registered.

Delta 1010 vs. RME multiface

Discussion in 'Converters / Interfaces' started by Doug102938@aol.com, Aug 10, 2003.

  1. Doug102938@aol.com

    Doug102938@aol.com Active Member

    Hey all, who wins in a nock down drag out? I know its not a fair comparison since 1 has more Ins and outs and is more expensive but all I need is 8 trs ins 2 trs outs and im happy. So I guess the question is how the 1010s converters stack up. Also another question for you.. Is it possible to mix in protools even when tracking with another software using either of these converters. thanks
  2. Opus2000

    Opus2000 Well-Known Member

    The Delta series converters are not as warm as the RME comverters. The Delta series seems to be too harsh in the high end to me where as the RME is pretty flat.

    Having some phase testing and input/output tests the RME wins hands down.

    Obviously with Pro Tools you have to use their hardware so you would need an Mbox, 001, 002 or an AMIII card to use Pro Tools LE.

    You could probably run two applications at once but depending on your system and how beefy it is whether or not you could do it efficiently or not.

    Most likley the answer is no as the Pro Tools LE will take up most of your memory.

    Opus :D
  3. RME every time...
  4. Opus2000

    Opus2000 Well-Known Member

    Pretty much huh?!!!

    They make great reliable hardware..

    Opus :D

Share This Page